RFC 9560: Federated Authentication for the Registration Data Access Protocol (RDAP) Using OpenID Connect

RFC 9560	OIDC for RDAP	April 2024
Hollenbeck	Standards Track	[Page]

Abstract

The Registration Data Access Protocol (RDAP) provides Representational State Transfer (RESTful) web services to retrieve registration metadata from domain name and regional internet registries. RDAP allows a server to make access control decisions based on client identity, and as such, it includes support for client identification features provided by the Hypertext Transfer Protocol (HTTP). Identification methods that require clients to obtain and manage credentials from every RDAP server operator present management challenges for both clients and servers, whereas a federated authentication system would make it easier to operate and use RDAP without the need to maintain server-specific client credentials. This document describes a federated authentication system for RDAP based on OpenID Connect.¶

3. Federated Authentication for RDAP

RDAP itself does not include built-in security services. Instead, RDAP relies on features that are available in other protocol layers to provide needed security services including access control, authentication, authorization, availability, data confidentiality, data integrity, and identification. A description of each of these security services can be found in "Internet Security Glossary, Version 2" [RFC4949]. This document focuses on a federated authentication system for RDAP that provides services for authentication, authorization, and identification, allowing a server operator to make access control decisions. Section 3 of [RFC7481] describes general considerations for RDAP access control, authentication, and authorization.¶

The conventional client-server authentication model requires clients to maintain distinct credentials for every RDAP server. This situation can become unwieldy as the number of RDAP servers increases. Federated authentication mechanisms allow clients to use one credential to access multiple RDAP servers and reduce client credential management complexity.¶

3.1. RDAP and OpenID Connect

OpenID Connect 1.0 [OIDCC] is a decentralized, Single Sign-On (SSO) federated authentication system that allows users to access multiple web resources with one identifier instead of having to create multiple server-specific identifiers. Users acquire identifiers from OpenID Providers (OPs). Relying Parties (RPs) are applications (such as RDAP) that outsource their user authentication function to an OP. OpenID Connect is built on top of the authorization framework provided by the OAuth 2.0 protocol [RFC6749].¶

The OAuth authorization framework describes a method for users to access protected web resources without having to hand out their credentials. Instead, clients are issued access tokens by OPs with the permission of the resource owners. Using OpenID Connect and OAuth, multiple RDAP servers can form a federation, and clients can access any server in the federation by providing one credential registered with any OP in that federation. The OAuth authorization framework is designed for use with HTTP and thus can be used with RDAP.¶

3.1.1. Terminology

This document uses the following terminology.¶

Terms defined by [RFC7480]:¶

client¶
server¶

Terms defined by [RFC6749]:¶

access token¶
authorization code¶
authorization endpoint¶
authorization grant¶
client authentication¶
client identifier¶
protected resource¶
refresh token¶
resource owner¶
resource server¶
token endpoint¶

Terms defined by [RFC7519]:¶

claim name¶
claim value¶
JSON Web Token (JWT)¶

Terms defined by [OIDCC]:¶

ID Token¶
UserInfo Endpoint¶

Term defined by [RFC9068]:¶

JWT access token¶

Additional terms from Section 1.2 of the OpenID Connect Core specification are incorporated by reference.¶

This document uses the terms "remote" and "default" to describe the relationship between an RDAP server and the OPs that it interacts with. A "remote" OP is one that is identified by the RDAP client by providing either an Issuer Identifier or an end-user identifier in a login request. Whether an Issuer Identifier or end-user identifier can be provided in the login request for the purposes of selecting an OP can be determined by retrieving the RDAP server's OIDC configuration details (see Section 4.1). A "default" OP is one that the RDAP server will use when the RDAP client does not provide an Issuer Identifier or an end-user identifier in the login request.¶

This document uses the term "session" to describe a set of interactions between an RDAP client and an RDAP server during a given period of time. For session-oriented clients (see Section 3.1.2), the RDAP session is a typical HTTP session starting with a farv1_session/login request and ending with either a farv1_session/logout request (see Section 5 for a description of both path segments) or a timeout. For token-oriented clients (see Sections 3.1.2 and 6), the RDAP session corresponds to the lifespan of an authorization obtained from an OP and the corresponding access token, including any refreshed access tokens.¶

3.1.2. Client Considerations

Clients that delegate OIDC authentication to an RDAP server as part of session-oriented interactions and can accept and process HTTP cookies [RFC6265] to maintain the session are known as "session-oriented" clients. This type of RDAP client performs the role of a user agent [RFC9110]. An RDAP server performs the role of an OpenID Connect Core Relying Party (RP). A web browser used to send queries directly to an RDAP server is an example of a session-oriented client. Specifications for this type of client can be found in Section 5.¶

Clients that perform OIDC authentication directly, taking the role of an RP in interactions with an OP and sending access tokens [RFC6749] to an RDAP server to authorize RDAP queries, are known as "token-oriented" clients. An RDAP server performs resource server [RFC6749] functions to verify the tokens received from the client and RP functions to retrieve information from the OP as necessary to make access control decisions. A web browser running JavaScript received from a web service that sends queries to an RDAP server directly or through its back-end web service is an example of a token-oriented client. Specifications for this type of client can be found in Section 6.¶

Clients MAY operate as either session-oriented or token-oriented clients, but they MUST do so consistently by not mixing token-oriented and session-oriented requests while interacting with an OP. Servers SHOULD support both types of client to maximize interoperability but MAY choose to support only one type of client as required by local policy or operating conditions. A server that does not support a particular client type will not support the protocol features (the data structures, path segments, parameters, and interactions) specified for that client type. Server signaling of supported client types is described in Section 4.1.¶

3.1.3. Overview

At a high level, RDAP authentication of a session-oriented client using OpenID Connect requires completion of the following steps:¶

An RDAP client sends an RDAP "help" query to an RDAP server to determine the types and capabilities of the OPs that are used by the RDAP server. This information is returned in the "rdapConformance" section of the response. A value of "farv1" indicates support for the extension described in this specification. If one or more remote OPs are supported, the RDAP client SHOULD evaluate the additional information described in Section 4.1 in order to discover the capabilities of the RDAP server and optionally obtain the set of supported OPs unless that information is available from a trusted out-of-band source and has already been processed.¶
An RDAP client sends an RDAP "login" request to an RDAP server as described in Section 5.2.¶
The RDAP server prepares an Authentication Request containing the desired request parameters.¶
The RDAP server sends an Authentication Request to an OP authorization endpoint and redirects the RDAP client to the OP using an HTTP redirect.¶
The OP authenticates the end user.¶
The OP obtains end-user consent and authorization.¶
The OP sends the RDAP client back to the RDAP server with an authorization code using an HTTP redirect.¶
The RDAP server requests tokens using the authorization code at the OP's token endpoint.¶
The RDAP server receives a response that contains an ID Token and access token in the response body.¶
The RDAP server validates the tokens as described in [OIDCC] and retrieves the claims associated with the end user's identity from the OP's UserInfo Endpoint.¶

The steps above can be described in a sequence diagram:¶

End          OpenID         RDAP                 RDAP
User        Provider       Client               Server
  |             |             |                    |
  |             |             |-----Help Query---->|
  |             |             |                    |
  |             |             |<---Help Response---|
  |             |             |                    |
  |-------Login Request------>|                    |
  |             |             |                    |
  |             |             |---Login Request--->|
  |             |             |                    |
  |             |<-----Authentication Request------|
  |             |             |                    |
  | Credential--|             |                    |
  |<--Request   |             |                    |
  |             |             |                    |
  |--Credential |             |                    |
  |   Response->|             |                    |
  |             |             |                    |
  |             |-----Authentication Response----->|
  |             |             |                    |
  |             |<----------Token Request----------|
  |             |             |                    |
  |             |-----------Token Response-------->|
  |             |             |                    |
  |             |<----------Claim Request----------|
  |             |             |                    |
  |             |-----------Claim Response-------->|
  |             |             |                    |
  |             |             |<--Login Response---|
  |             |             |                    |
  |<------Login Response------|                    |
  |             |             |                    |
  |----------RDAP Query------>|                    |
  |             |             |                    |
  |             |             |-----RDAP Query---->|
  |             |             |                    |
  |             |             |<---RDAP Response---|
  |             |             |                    |
  |<------RDAP Response-------|                    |

Figure 1

The RDAP server can then make identification, authorization, and access control decisions based on end-user identity information and local policies. Note that OpenID Connect describes different process flows for other types of clients, such as script-based or command-line clients.¶

RDAP authentication of a token-oriented client using OpenID Connect requires completion of the following steps:¶

An RDAP client sends an RDAP "help" query to an RDAP server to determine the type and capabilities of the OPs that are used by the RDAP server. This information is returned in the "rdapConformance" section of the response. A value of "farv1" indicates support for the extension described in this specification. If one or more remote OPs are supported, the RDAP client SHOULD evaluate the additional information described in Section 4.1 in order to discover the capabilities of the RDAP server and optionally obtain the set of supported OPs. Support for token-oriented clients requires a default OP.¶
The RDAP client determines the end user's OP and confirms that it's supported by the RDAP server.¶
The RDAP client sends an Authentication Request to the OP's authorization endpoint.¶
The OP authenticates the end user.¶
The OP obtains end-user consent or authorization.¶
The OP returns an authorization code to the RDAP client.¶
The RDAP client requests tokens using the authorization code at the OP's token endpoint.¶
The RDAP client receives a response that contains an ID Token and an access token in the response body.¶
The RDAP client monitors the token validity period and either refreshes the token or requests new tokens as necessary.¶
The RDAP client sends queries that require user identification, authentication, and authorization to an RDAP server that include an access token in an HTTP "authorization" header using the "bearer" authentication scheme described in [RFC6750].¶
The RDAP server validates the access token and retrieves the claims associated with the end user's identity from the OP's UserInfo Endpoint.¶
The RDAP server determines the end user's authorization level and processes the query in accordance with server policies.¶

The steps above can be described in a sequence diagram:¶

End          OpenID         RDAP                 RDAP
User        Provider       Client               Server
  |             |             |                    |
  |             |             |-----Help Query---->|
  |             |             |                    |
  |             |             |<----Help Response--|
  |             |             |                    |
  |-------Login Request------>|                    |
  |             |             |                    |
  |             |<-Authentication                  |
  |             |   Request---|                    |
  |             |             |                    |
  |<-Credential |             |                    |
  |   Request---|             |                    |
  |             |             |                    |
  |--Credential |             |                    |
  |   Response->|             |                    |
  |             |             |                    |
  |             |--Authentication                  |
  |             | Response--->|                    |
  |             |             |                    |
  |             |<-Token      |                    |
  |             |  Request----|                    |
  |             |             |                    |
  |             |--Token      |                    |
  |             |  Response-->|                    |
  |             |             |                    |
  |<------Login Response------|                    |
  |             |             |                    |
  |-----RDAP Query----------->|                    |
  |             |             |                    |
  |             |             |----RDAP Query----->|
  |             |             |                    |
  |             |<------------Claim                |
  |             |            Request---------------|
  |             |             |                    |
  |             |-------------Claim                |
  |             |            Response------------->|
  |             |             |                    |
  |             |             |<---RDAP Response---|
  |             |             |                    |
  |<----RDAP Response---------|                    |

Figure 2

3.1.4. RDAP Authentication and Authorization Steps

End users MAY present an identifier (an OpenID) issued by an OP to use OpenID Connect with RDAP. If the RDAP server supports a default OP or if provider discovery is not supported, the end-user identifier MAY be omitted. An OP SHOULD include support for the claims described in Section 3.1.5 to provide additional information needed for RDAP end-user authorization; in the absence of these claims, clients and servers MAY make authorization and access control decisions as appropriate given any other information returned from the OP. OpenID Connect requires RPs to register with OPs to use OpenID Connect services for an end user. The registration process is often completed using out-of-band methods, but it is also possible to use the automated method described by the OpenID Connect Dynamic Client Registration protocol [OIDCR]. The parties involved can use any method that is mutually acceptable.¶

3.1.4.1. Provider Discovery

An RDAP server acting as an RP needs to be able to map an end user's identifier to an OP. This can be accomplished using the OPTIONAL OpenID Connect Discovery protocol [OIDCD], but that protocol is not widely implemented. Out-of-band methods are also possible and can be more dependable. For example, an RP can support a limited number of OPs and maintain internal associations of those identifiers with the OPs that issued them.¶

Alternatively, if mapping an end user's identifier is not possible, or not supported by the RDAP server, the RDAP server SHOULD support explicit specification of a remote OP by the RDAP client in the form of a query parameter as described in Section 5.2.2 unless the remote OP has been identified using an out-of-band mechanism. An RDAP server MUST provide information about its capabilities and supported OPs in the "help" query response in the "farv1_openidcConfiguration" data structure described in Section 4.1. An RDAP server acting as an RP MUST support at least one of these methods of OP discovery.¶

3.1.4.2. Authentication Request

Once the OP is known, an RP MUST form an Authentication Request and send it to the OP as described in Section 3 of [OIDCC]. The authentication path followed (authorization, implicit, or hybrid) will depend on the Authentication Request response_type set by the RP. The remainder of the processing steps described here assume that the authorization code flow is being used by setting "response_type=code" in the Authentication Request.¶

The benefits of using the authorization code flow for authenticating a human user are described in Section 3.1 of [OIDCC]. The Implicit Flow is more commonly used by clients implemented in a web browser using a scripting language; it is described in Section 3.2 of [OIDCC]. At the time of this writing, the Implicit Flow is considered insecure and efforts are being made to deprecate the flow. The Hybrid Flow (described in Section 3.3 of [OIDCC]) combines elements of the authorization code and Implicit Flows by returning some tokens from the authorization endpoint and others from the token endpoint.¶

An Authentication Request can contain several parameters. REQUIRED parameters are specified in Section 3.1.2.1 of [OIDCC]. Apart from these parameters, it is RECOMMENDED that the RP include the optional "login_hint" parameter in the request, with the value being that of the "farv1_id" query parameter of the end user's RDAP "login" request, if provided. Passing the "login_hint" parameter allows a client to pre-fill login form information, so logging in can be more convenient for users. Other parameters MAY be included.¶

The OP receives the Authentication Request and attempts to validate it as described in Section 3.1.2.2 of [OIDCC]. If the request is valid, the OP attempts to authenticate the end user as described in Section 3.1.2.3 of [OIDCC]. The OP returns an error response if the request is not valid or if any error is encountered.¶

3.1.4.3. End User Authorization

After the end user is authenticated, the OP MUST obtain consent from the end user to release authorization information to the RDAP server acting as an RP. This process is described in Section 3.1.2.4 of [OIDCC].¶

3.1.4.4. Authorization Response and Validation

After obtaining an authorization result, the OP will send a response to the RP that provides the result of the authorization process using an authorization code. The RP MUST validate the response. This process is described in Sections 3.1.2.5 - 3.1.2.7 of [OIDCC].¶

3.1.4.5. Token Processing

The RP sends a token request using the authorization grant to a token endpoint to obtain a token response containing an access token, ID Token, and an OPTIONAL refresh token. The RP MUST validate the token response. This process is described in Section 3.1.3.5 [OIDCC].¶

3.1.4.6. Delivery of User Information

The set of claims can be retrieved by sending a request to a UserInfo Endpoint using the access token. The claims are returned in the ID Token. The process of retrieving claims from a UserInfo Endpoint is described in Section 5.3 of [OIDCC].¶

OpenID Connect specifies a set of standard claims in Section 5.1 of [OIDCC]. Additional claims for RDAP are described in Section 3.1.5.¶

3.1.5. Specialized Claims and Authorization Scope for RDAP

OpenID Connect claims are pieces of information used to make assertions about an entity. Section 5 of [OIDCC] describes a set of standard claims. Section 5.1.2 of [OIDCC] notes that additional claims MAY be used, and it describes a method to create them. The set of claims that are specific to RDAP are associated with an OAuth scope request parameter value (see Section 3.3 of [RFC6749]) of "rdap".¶

3.1.5.1. Stated Purposes

Communities of RDAP users and operators may wish to make and validate claims about a user's "need to know" when it comes to requesting access to a protected resource. For example, a law enforcement agent or a trademark attorney may wish to be able to assert that they have a legal right to access a protected resource, and a server operator may need to be able to receive and validate that claim. These needs can be met by defining and using an additional "rdap_allowed_purposes" claim.¶

The "rdap_allowed_purposes" claim identifies the purposes for which access to a protected resource can be requested by an end user. Use of the "rdap_allowed_purposes" claim is OPTIONAL; processing of this claim is subject to server acceptance of the purposes, the trust level assigned to this claim by the server, and successful authentication of the end user. Unrecognized purpose values MUST be ignored, and the associated query MUST be processed as if the unrecognized purpose value was not present at all. See Section 9.3 for a description of the IANA considerations associated with this claim.¶

The "rdap_allowed_purposes" claim is represented as an array of case-sensitive StringOrURI values as specified in Section 2 of [RFC7519]. An example:¶

"rdap_allowed_purposes": ["domainNameControl","dnsTransparency"]¶

Purpose values are assigned to an end user's credential by an identity provider. Identity providers MUST ensure that appropriate purpose values are only assigned to end user identities that are authorized to use them.¶

3.1.5.2. Do Not Track

Communities of RDAP users and operators may wish to make and validate claims about a user's wish to not have their queries logged, tracked, or recorded. For example, a law enforcement agent may wish to assert that their queries are part of a criminal investigation and should not be tracked due to a risk of query exposure compromising the investigation, and a server operator may need to be able to receive and validate that claim. These needs can be met by defining and using an additional "do not track" claim.¶

The "do not track" ("rdap_dnt_allowed") claim can be used to identify an end user that is authorized to perform queries without the end user's association with those queries being logged, tracked, or recorded by the server. Client use of the "rdap_dnt_allowed" claim is OPTIONAL. Server operators MUST NOT log, track, or record any association of the query and the end user's identity if the end user is successfully identified and authorized, if the "rdap_dnt_allowed" claim is present, if the value of the claim is "true", and if accepting the claim complies with local regulations regarding logging and tracking.¶

The "rdap_dnt_allowed" value is represented as a JSON boolean literal. An example:¶

rdap_dnt_allowed: true¶

No special query tracking processing is required if this claim is not present or if the value of the claim is "false". Use of this claim MUST be limited to end users who are granted "do not track" privileges in accordance with service policies and regulations. Specification of these policies and regulations is beyond the scope of this document.¶

4. Common Protocol Features

As described in Section 3.1.4.1, an RDAP server MUST provide information about its capabilities and supported OPs in a "help" query response. This specification describes a new "farv1_openidcConfiguration" data structure that describes the OpenID Connect configuration and related extension features supported by the RDAP server. This data structure is returned to all client types.¶

4.1. OpenID Connect Configuration

The "farv1_openidcConfiguration" data structure is an object with the following members:¶

"sessionClientSupported":

(REQUIRED) a boolean value that describes RDAP server support for session-oriented clients (see Section 3.1.2).¶

"tokenClientSupported":

(REQUIRED) a boolean value that describes RDAP server support for token-oriented clients (see Section 3.1.2).¶

"dntSupported":

(REQUIRED) a boolean value that describes RDAP server support for the "farv1_dnt" query parameter (see Section 4.2.2).¶

"providerDiscoverySupported":

(OPTIONAL) a boolean value that describes RDAP server support for discovery of providers of end-user identifiers. The default value is "true".¶

"issuerIdentifierSupported":

(OPTIONAL) a boolean value that describes RDAP server support for explicit client specification of an Issuer Identifier. The default value is "true".¶

"implicitTokenRefreshSupported":

(OPTIONAL) a boolean value that describes RDAP server support for implicit token refresh. The default value is "false".¶

"openidcProviders":

(OPTIONAL) a list of objects with the following members that describes the set of OPs that are supported by the RDAP server. This data is RECOMMENDED if the value of issuerIdentifierSupported is "true":¶

"iss":: (REQUIRED) a URI value that represents the Issuer Identifier of the OP as per the OpenID Connect Core specification [OIDCC].¶
"name":: (REQUIRED) a string value representing the human-friendly name of the OP.¶
"default":: (OPTIONAL) a boolean value that describes RDAP server support for an OPTIONAL default OP that will be used when a client omits the "farv1_id" and "farv1_iss" query parameters from a "farv1_session/login" request. Only one member of this set can be identified as the default OP by setting a value of "true". The default value is "false".¶
"additionalAuthorizationQueryParams":: (OPTIONAL) an object where each member represents an OAuth authorization request parameter name-value pair supported by the OP. The name represents an OAuth query parameter, and the value is the query parameter value. A token-oriented RDAP client SHOULD add these query parameters and their corresponding values to the Authentication Request URL when requesting authorization by a specified OP through a proxy OP.¶

An RDAP server MUST set either the "sessionClientSupported" or the "tokenClientSupported" value to "true". Both values MAY be set to "true" if an RDAP server supports both types of clients.¶

The "providerDiscoverySupported" value has a direct impact on the use of the "farv1_id" query parameter described in Sections 3.1.4.2 and 5.2.1. The value of "providerDiscoverySupported" MUST be "true" for an RDAP server to properly accept and process "farv1_id" query parameters. Similarly, the "issuerIdentifierSupported" value has a direct impact on the use of the "farv1_iss" query parameter described in Section 5.2.2. The value of "issuerIdentifierSupported" MUST be "true" for an RDAP server to properly accept and process "farv1_iss" query parameters.¶

An example of a "farv1_openidcConfiguration" data structure:¶

"farv1_openidcConfiguration": {
  "sessionClientSupported": true,
  "tokenClientSupported": true,
  "dntSupported": false,
  "providerDiscoverySupported": true,
  "issuerIdentifierSupported": true,
  "openidcProviders":
    [
      {
        "iss": "https://idp.example.com",
        "name": "Example IDP"
      },
      {
        "iss": "https://accounts.example.net",
        "name": "Login with EXAMPLE",
        "additionalAuthorizationQueryParams": {
          "kc_idp_hint": "examplePublicIDP"
        }
      },
      {
        "iss": "https://auth.nic.example/auth/realms/rdap",
        "name": "Default OP for the Example RDAP server",
        "default": true
      }
    ]
}

Figure 3

4.2. RDAP Query Parameters

This specification describes two OPTIONAL query parameters for use with RDAP queries that request access to information associated with protected resources:¶

"farv1_qp":: A query parameter to identify the purpose of the query.¶
"farv1_dnt":: A query parameter to request that the server not log or otherwise record information about the identity associated with a query.¶

One or both parameters MAY be added to an RDAP request URI using the syntax described in Section "application/x-www-form-urlencoded" of [HTMLURL].¶

4.2.1. RDAP Query Purpose

This query is represented as a "key=value" pair using a key value of "farv1_qp" and a value component that contains a single query purpose string from the set of allowed purposes associated with the end user's identity (see Section 3.1.5.1). If present, the server SHOULD compare the value of the parameter to the "rdap_allowed_purposes" claim values associated with the end user's identity and ensure that the requested purpose is present in the set of allowed purposes. The RDAP server MAY choose to ignore both the requested purpose and the "rdap_allowed_purposes" claim values if they are inconsistent with local server policy. The server MUST return an HTTP 403 (Forbidden) response if the requested purpose is not an allowed purpose. If the "farv1_qp" parameter is not present, the server MUST process the query and make an access control decision based on any other information known to the server about the end user and the information they are requesting. For example, a server MAY treat the request as one performed by an unidentified or unauthenticated user and return either an error or an appropriate subset of the available data. An example domain query using the "farv1_qp" query parameter:¶

https://example.com/rdap/domain/example.com?farv1_qp=legalActions

Figure 4

4.2.2. RDAP Do Not Track

This query is represented as a "key=value" pair using a key value of "farv1_dnt" and a value component that contains a single boolean value. A value of "true" indicates that the end user is requesting that their query is not tracked or logged in accordance with server policy. A value of "false" indicates that the end user is accepting that their query can be tracked or logged in accordance with server policy. The server MUST return an HTTP 403 (Forbidden) response if the server is unable to perform the action requested by this query parameter. An example domain query using the "farv1_dnt" query parameter:¶

https://example.com/rdap/domain/example.com?farv1_dnt=true

Figure 5

4.2.3. Parameter Processing

Unrecognized query parameters MUST be ignored. An RDAP server that processes an authenticated query MUST determine if the end-user identification information is associated with an OP that is recognized and supported by the server. RDAP servers MUST reject queries that include identification information that is not associated with a supported OP by returning an HTTP 400 (Bad Request) response. An RDAP server that receives a query containing identification information associated with a recognized OP MUST perform the steps required to authenticate the user with the OP, process the query, and return an RDAP response that is appropriate for the end user's level of authorization and access.¶

5. Protocol Features for Session-Oriented Clients

This specification adds the following features to RDAP that are commonly used by session-oriented clients:¶

Data structures to return information that describes an established session and the information needed to establish a session for a UI-constrained device.¶
A query parameter to request authentication for a specific end-user identity.¶
A query parameter to support authentication for a specific end-user identity on a device with a constrained user interface.¶
A query parameter to identify the purpose of the query.¶
A query parameter to request that the server not log or otherwise record information about the identity associated with a query.¶
Path segments to start, stop, refresh, and determine the status of an authenticated session for a specific end-user identity.¶

5.1. Data Structures

This specification describes two new data structures that are used to return information to a session-oriented client:¶

"farv1_session":: A data structure that contains information that describes an established session.¶
"farv1_deviceInfo":: A data structure that contains information that describes an active attempt to establish a session on a UI-constrained device.¶

5.1.1. Session

The "farv1_session" data structure is an object that contains the following members:¶

"userID":

an OPTIONAL string value that represents the end-user identifier associated with the session.¶

"iss":

an OPTIONAL URI value that represents the issuer of the end-user identifier associated with the session.¶

"userClaims":

an OPTIONAL object that contains the set of claims associated with the end user's identity based on the user information provided by the OP as described in Section 3.1.4.6 and processed by the RDAP server in the authentication and authorization process. The set of possible values is determined by OP policy and RDAP server policy.¶

"sessionInfo":

an OPTIONAL object that contains two members:¶

"tokenExpiration":: an integer value that represents the number of seconds that remain in the lifetime of the access token.¶
"tokenRefresh":: a boolean value that indicates if the OP supports refresh tokens. As described in [RFC6749], support for refresh tokens is OPTIONAL.¶

Note that all of the members of the "farv1_session" data structure are OPTIONAL. See Section 5.2.3 for instructions describing when to return the minimum set of members.¶

An example of a "farv1_session" data structure:¶

  "farv1_session": {
    "userID": "user.idp.example",
    "iss": "https://idp.example.com",
    "userClaims": {
      "sub": "103892603076825016132",
      "name": "User Person",
      "given_name": "User",
      "family_name": "Person",
      "picture": "https://lh3.example.com/a-/AOh14=s96-c",
      "email": "user@example.com",
      "email_verified": true,
      "locale": "en",
      "rdap_allowed_purposes": [
        "domainNameControl",
        "personalDataProtection"
      ],
      "rdap_dnt_allowed": false
    },
    "sessionInfo": {
      "tokenExpiration": 3599,
      "tokenRefresh": true
    }
  }

Figure 6

5.1.2. Device Info

The flow described in Section 3.1.4 requires an end user to interact with a server using a user interface that can process HTTP. This will not work well in situations where the client is automated or an end user is using a command-line user interface such as curl or wget. This limitation can be addressed using a web browser on a second device. The information that needs to be entered using the web browser is contained in the "farv1_deviceInfo" data structure, an object that contains members as described in Section 3.2 of [RFC8628].¶

An example of a "farv1_deviceInfo" data structure:¶

  "farv1_deviceInfo": {
    "device_code": "AH-1ng2ezu",
    "user_code": "NJJQ-GJFC",
    "verification_uri": "https://www.example.com/device",
    "verification_uri_complete":
       "https://www.example.com/device?user_code=NJJQ-GJFC",
    "expires_in": 1800,
    "interval": 5
  }

Figure 7

Client authentication is requested by sending a "farv1_session/login" request to an RDAP server. If the RDAP server supports only remote OPs, the "farv1_session/login" request MUST include at least one end-user identifier or OP Issuer Identifier.¶

The server sets an HTTP cookie as described in [RFC6265] when the "farv1_session/login" request is received and processed successfully. The client MUST include the session cookie received from the server in any RDAP request within the scope of that session, including "farv1_session/refresh", "farv1_session/status", and "farv1_session/logout". A "farv1_session/login" followed by another "farv1_session/login" that does not include an HTTP cookie MUST start a new session on the server that includes a new cookie. A server that receives a "farv1_session/login" followed by another "farv1_session/login" that includes an HTTP cookie MUST return an HTTP 409 (Conflict) response.¶

To help reduce the risk of resource starvation, a server MAY reject a "farv1_session/login" request and refuse to start a new session by returning an HTTP 409 (Conflict) response if a server-side maximum number of concurrent sessions per user exists and the client exceeds that limit. Additionally, an active session MAY be removed by the server due to timeout expiration or because a maximum session lifetime has been exceeded. Clients SHOULD proactively monitor the "tokenExpiration" value associated with an active session and refresh the session as appropriate to provide a positive user experience.¶

5.2.1. End-User Identifier

The end-user identifier is delivered using one of two methods: by adding a query component to an RDAP request URI using the syntax described in Section "application/x-www-form-urlencoded" of [HTMLURL] or by including an HTTP "authorization" request header for the Basic authentication scheme as described in [RFC7617]. Clients can use either of these methods to deliver the end-user identifier to a server that supports remote OPs and provider discovery. Servers that support remote OPs and provider discovery MUST accept both methods. If the RDAP server supports a default OP or if provider discovery is not supported, the end-user identifier MAY be omitted.¶

The query parameter used to deliver the end-user identifier is represented as an OPTIONAL "key=value" pair using a key value of "farv1_id" and a value component that contains the client identifier issued by an OP. An example for client identifier "user.idp.example":¶

========== NOTE: '\' line wrapping per RFC 8792 ===========
https://example.com/rdap/farv1_session/\
login?farv1_id=user.idp.example

Figure 8

The authorization header for the Basic authentication scheme contains a base64-encoded representation of the client identifier issued by an OP. No password is provided. An example for client identifier "user.idp.example":¶

https://example.com/rdap/farv1_session/login
Authorization: Basic dXNlci5pZHAuZXhhbXBsZQ==

Figure 9

An example for use with a default OP:¶

https://example.com/rdap/farv1_session/login

Figure 10

5.2.2. OP Issuer Identifier

The OP's Issuer Identifier is delivered by adding a query component to an RDAP request URI using the syntax described in Section "application/x-www-form-urlencoded" of [HTMLURL]. If the RDAP server supports a default OP, the Issuer Identifier MAY be omitted.¶

The query parameter used to deliver the OP's Issuer Identifier is represented as an OPTIONAL "key=value" pair using a key value of "farv1_iss" and a value component that contains the Issuer Identifier associated with an OP. An RDAP server MAY accept Issuer Identifiers not specified in the "farv1_openidcConfiguration" data structure and MAY also decide to accept specific Issuer Identifiers only from specific clients. An example for Issuer Identifier "https://idp.example.com":¶

========== NOTE: '\' line wrapping per RFC 8792 ===========
https://example.com/rdap/farv1_session/\
login?farv1_iss=https://idp.example.com

Figure 11

The response to this request MUST be a valid RDAP response per [RFC9083]. It MUST NOT include any members that relate to a specific RDAP object type (e.g., "events" or "status"). In addition, the response MAY include an indication of the requested operation's success or failure in the "notices" data structure. If successful, the response MUST include a "farv1_session" data structure that includes a "sessionInfo" object and an OPTIONAL "userClaims" object. If unsuccessful, the response MUST include a "farv1_session" data structure that omits the "userClaims" and "sessionInfo" objects.¶

An example of a successful "farv1_session/login" response:¶

    {
      "rdapConformance": [
        "farv1"
      ],
      "lang": "en-US",
      "notices": [
        {
          "title": "Login Result",
          "description": [
            "Login succeeded"
          ]
        }
      ],
      "farv1_session": {
        "userID": "user.idp.example",
        "iss": "https://idp.example.com",
        "userClaims": {
          "sub": "103892603076825016132",
          "name": "User Person",
          "given_name": "User",
          "family_name": "Person",
          "picture": "https://lh3.example.com/a-/AOh14=s96-c",
          "email": "user@example.com",
          "email_verified": true,
          "locale": "en",
          "rdap_allowed_purposes": [
            "domainNameControl",
            "personalDataProtection"
          ],
          "rdap_dnt_allowed": false
        },
        "sessionInfo": {
          "tokenExpiration": 3599,
          "tokenRefresh": true
        }
      }
    }

Figure 12

An example of a failed "farv1_session/login" response:¶

    {
      "rdapConformance": [
        "farv1"
      ],
      "lang": "en-US",
      "notices": [
        {
          "title": "Login Result",
          "description": [
            "Login failed"
          ]
        }
      ],
      "farv1_session": {
        "userID": "user.idp.example",
        "iss": "https://idp.example.com"
      }
    }

Figure 13

5.2.4. Clients with Limited User Interfaces

"OAuth 2.0 Device Authorization Grant" [RFC8628] provides an OPTIONAL method to request user authorization from devices that have an Internet connection but lack a suitable browser for a more conventional OAuth flow. This method requires an end user to use a second device (such as a smartphone) that has access to a web browser for entry of a code sequence that is presented on the UI-constrained device.¶

Client authentication is requested by sending a "farv1_session/device" request to an RDAP server. If the RDAP server supports only remote OPs, the "farv1_session/device" request MUST include either an end-user identifier as described in Section 5.2.1 or an OP Issuer Identifier as described in Section 5.2.2.¶

An example using wget for client identifier "user.idp.example":¶

========== NOTE: '\' line wrapping per RFC 8792 ===========
   wget -qO- "https://example.com/rdap/farv1_session/device\
   ?farv1_id=user.idp.example"

Figure 14

The authorization header for the Basic authentication scheme contains a base64-encoded representation of the client identifier issued by an OP. No password is provided.¶

An example using curl and an authorization header:¶

========== NOTE: '\' line wrapping per RFC 8792 ===========
   curl -H "Authorization: Basic dXNlci5pZHAuZXhhbXBsZQ=="\
   "https://example.com/rdap/farv1_session/device"

Figure 15

An example of a "farv1_session/device" response:¶

  {
    "rdapConformance": [
      "farv1"
    ],
    "lang": "en-US",
    "notices": [
      {
        "title": "Device Login Result",
        "description": [
          "Login succeeded"
        ]
      }
    ],
    "farv1_deviceInfo": {
      "device_code": "AH-1ng2ezu",
      "user_code": "NJJQ-GJFC",
      "verification_uri": "https://www.example.com/device",
      "verification_uri_complete":
              "https://www.example.com/device?user_code=NJJQ-GJFC",
      "expires_in": 1800,
          "interval": 5
    }
  }

Figure 16

After successful processing of the "farv1_session/device" request, the client MUST send a "farv1_session/devicepoll" request to the RDAP server to continue the login process. This request initiates the polling function described in [RFC8628] on the RDAP server. The RDAP server polls the OP as described in Section 3.4 of [RFC8628], allowing the RDAP server to wait for the end user to enter the information returned from the "farv1_session/device" request using the interface on their second device. After the end user has completed that process, or if the process fails or times out, the OP will respond to the polling requests with an indication of success or failure. If the RDAP server supports only remote OPs, the "farv1_session/devicepoll" request MUST include either an end-user identifier as described in Section 5.2.1 or an OP Issuer Identifier as described in Section 5.2.2.¶

The "farv1_session/devicepoll" request MUST also include a "farv1_dc" query parameter. The query parameter is represented as an OPTIONAL "key=value" pair using a key value of "farv1_dc" and a value component that contains the value of the device_code that was returned in the response to the "farv1_session/device" request.¶

An example using wget:¶

========== NOTE: '\' line wrapping per RFC 8792 ===========
   wget -qO- --keep-session-cookies --save-cookies cookie.txt\
   "https://example.com/rdap/farv1_session/devicepoll\
   ?farv1_id=user.idp.example&farv1_dc=AH-1ng2ezu"

Figure 17

An example using curl:¶

========== NOTE: '\' line wrapping per RFC 8792 ===========
   curl -c cookie.txt "https://example.com/rdap/farv1_session/\
   devicepoll?farv1_id=user.idp.example&farv1_dc=AH-1ng2ezu"

Figure 18

The response to this request MUST use the response structures described in Section 5.2. RDAP query processing can continue normally on the UI-constrained device once the device polling process has been completed successfully.¶

5.3. Session Status

Clients MAY send a query to an RDAP server to determine the status of an existing login session using a "farv1_session/status" path segment. An example "farv1_session/status" request:¶

https://example.com/rdap/farv1_session/status

Figure 19

The response to this request MUST be a valid RDAP response per [RFC9083]. It MUST NOT include any members that relate to a specific RDAP object type (e.g., "events" or "status"). In addition, the response MAY include an indication of the requested operation's success or failure in the "notices" data structure. If the operation is successful and an active session exists, the response MUST include a "farv1_session" data structure that includes a "sessionInfo" object and an OPTIONAL "userClaims" object. If the operation is unsuccessful or if no active session exists, the response MUST NOT include a "farv1_session" object.¶

An example of a "farv1_session/status" response for an active session:¶

  {
    "rdapConformance": [
      "farv1"
    ],
    "lang": "en-US",
    "notices": [
      {
        "title": "Session Status Result",
        "description": [
          "Session status succeeded"
        ]
      }
    ],
    "farv1_session": {
      "userID": "user.idp.example",
      "iss": "https://idp.example.com",
      "userClaims": {
        "sub": "103892603076825016132",
        "name": "User Person",
        "given_name": "User",
        "family_name": "Person",
        "picture": "https://lh3.example.com/a-/AOh14=s96-c",
        "email": "user@example.com",
        "email_verified": true,
        "locale": "en",
        "rdap_allowed_purposes": [
          "domainNameControl",
          "personalDataProtection"
        ],
        "rdap_dnt_allowed": false
      },
      "sessionInfo": {
        "tokenExpiration": 3490,
        "tokenRefresh": true
      }
    }
  }

Figure 20

If the operation is successful and an active session does not exist, the response MAY note the lack of an active session in the "notices" data structure. The "farv1_session" data structure MUST be omitted.¶

An example of a "farv1_session/status" response with no active session:¶

  {
    "rdapConformance": [
      "farv1"
    ],
    "lang": "en-US",
    "notices": [
      {
        "title": "Session Status Result",
        "description": [
          "Session status succeeded",
          "No active session"
        ]
      }
    ]
  }

Figure 21

5.4. Session Refresh

Clients MAY send a request to an RDAP server to refresh or extend an existing login session using a "farv1_session/refresh" path segment. The RDAP server MAY attempt to refresh the access token associated with the current session as part of extending the session for a period of time determined by the RDAP server. As described in [RFC6749], OP support for refresh tokens is OPTIONAL. An RDAP server MUST determine if the OP supports token refresh and process the refresh request by either requesting refresh of the access token or returning a response that indicates that token refresh is not supported by the OP in the "notices" data structure. An example "farv1_session/refresh" request:¶

https://example.com/rdap/farv1_session/refresh

Figure 22

The response to this request MUST be a valid RDAP response per [RFC9083]. It MUST NOT include any members that relate to a specific RDAP object type (e.g., "events" or "status"). In addition, the response MAY include an indication of the requested operation's success or failure in the "notices" data structure. The response MUST include a "farv1_session" data structure that includes a "sessionInfo" object and an OPTIONAL "userClaims" object. If unsuccessful but an active session exists, the response MUST include a "farv1_session" data structure that includes a "sessionInfo" object and an OPTIONAL "userClaims" object. If unsuccessful and no active session exists, the response MUST omit the "farv1_session" data structure.¶

An example of a successful "farv1_session/refresh" response:¶

  {
    "rdapConformance": [
      "farv1"
    ],
    "lang": "en-US",
    "notices": [
      {
        "title": "Session Refresh Result",
        "description": [
          "Session refresh succeeded",
          "Token refresh succeeded."
        ]
      }
    ],
    "farv1_session": {
      "userID": "user.idp.example",
      "iss": "https://idp.example.com",
      "userClaims": {
        "sub": "103892603076825016132",
        "name": "User Person",
        "given_name": "User",
        "family_name": "Person",
        "picture": "https://lh3.example.com/a-/AOh14=s96-c",
        "email": "user@example.com",
        "email_verified": true,
        "locale": "en",
        "rdap_allowed_purposes": [
          "domainNameControl",
          "personalDataProtection"
        ],
        "rdap_dnt_allowed": false
      },
      "sessionInfo": {
        "tokenExpiration": 3599,
        "tokenRefresh": true
      }
    }
  }

Figure 23

Alternatively, an RDAP server MAY attempt to refresh an access token upon receipt of a query if the access token associated with an existing session has expired and the corresponding OP supports token refresh. The default RDAP server behavior is described in the "implicitTokenRefreshSupported" value that's included in the "farv1_openidcConfiguration" data structure (see Section 4.1).¶

If the value of "implicitTokenRefreshSupported" is "true", the client MAY either explicitly attempt to refresh the session using the "farv1_session/refresh" query or depend on the RDAP server to attempt to refresh the session as necessary when an RDAP query is received by the server. In this case, a server MUST attempt to refresh the access token upon receipt of a query if the access token associated with an existing session has expired and the corresponding OP supports token refresh. Servers MUST return an HTTP 401 (Unauthorized) response to a query if an attempt to implicitly refresh an existing session fails.¶

If the value of "implicitTokenRefreshSupported" is "false", the client MUST explicitly attempt to refresh the session using the "farv1_session/refresh" query to extend an existing session. If a session cannot be extended for any reason, the client MUST establish a new session to continue authenticated query processing by submitting a "farv1_session/login" query. If the OP does not support token refresh, the client MUST submit a new "farv1_session/login" request to establish a new session once an access token has expired.¶

Clients SHOULD NOT send a "farv1_session/refresh" request in the absence of an active login session because the request conflicts with the current state of the server. Servers MUST return an HTTP 409 (Conflict) response if a "farv1_session/refresh" request is received in the absence of a session cookie.¶

5.5. Client Logout

Clients MAY send a request to an RDAP server to terminate an existing login session. Termination of a session is requested using a "farv1_session/logout" path segment. Access and refresh tokens can be revoked during the "farv1_session/logout" process as described in [RFC7009] if supported by the OP (token revocation endpoint support is OPTIONAL per [RFC8414]). If supported, this feature SHOULD be used to ensure that the tokens are not mistakenly associated with a future RDAP session. Alternatively, an RDAP server MAY attempt to log out from the OP using the OpenID Connect RP-Initiated Logout protocol [OIDCL] if that protocol is supported by the OP. In any case, to prevent abuse before the cookie times out, an RDAP server SHOULD invalidate the HTTP cookie associated with the session as part of terminating the session.¶

An example "farv1_session/logout" request:¶

https://example.com/rdap/farv1_session/logout

Figure 24

An example of a "farv1_session/logout" response:¶

  {
    "rdapConformance": [
      "farv1"
    ],
    "lang": "en-US",
    "notices": [
      {
        "title": "Logout Result",
        "description": [
          "Logout succeeded"
          "Provider logout failed: Not supported by provider.",
          "Token revocation successful."
        ]
      }
    ]
  }

Figure 25

In the absence of a "logout" request, an RDAP session MUST be terminated by the RDAP server after a server-defined period of time. The server SHOULD also take appropriate steps to ensure that the tokens associated with the terminated session cannot be reused. This SHOULD include revoking the tokens or logging out from the OP if either operation is supported by the OP.¶

5.6. Request Sequencing

The requests described in this document are typically performed in a specific sequence:¶

"farv1_session/login" (or the related "farv1_session/device" and "farv1_session/devicepoll" requests) to start a session,¶
"farv1_session/status" and/or "farv1_session/refresh" to manage a session,¶
and "farv1_session/logout" to end a session.¶

If a client sends a "farv1_session/status", "farv1_session/refresh", or "farv1_session/logout" request in the absence of a session cookie, the server MUST return an HTTP 409 (Conflict) error.¶

A client can end a session explicitly by sending a "farv1_session/logout" request to the RDAP server. A session can also be ended implicitly by the server after a server-defined period of time. The status of a session can be determined at any time by sending a "farv1_session/status" query to the RDAP server.¶

An RDAP server MUST maintain session state information for the duration of an active session. This is commonly done using HTTP cookies as described in [RFC6265]. Doing so allows end users to submit queries without having to explicitly identify and authenticate themselves for every query.¶

An RDAP server can receive queries that include a session cookie where the associated session has expired or is otherwise unavailable (e.g., due to the user requesting explicit logout for the associated session). The server MUST return an HTTP 401 (Unauthorized) error in response to such queries.¶

9. IANA Considerations

9.1. RDAP Extensions Registry

IANA has registered the following value in the "RDAP Extensions" registry:¶

Extension Identifier:: farv1¶
Registry Operator:: Any¶
Specification:: RFC 9560¶
Contact:: IETF <iesg@ietf.org>¶
Intended Usage:: This extension describes federated authentication method for RDAP version 1 using OAuth 2.0 and OpenID Connect.¶

9.2. JSON Web Token Claims Registry

IANA has registered the following values in the "JSON Web Token Claims" registry:¶

Claim Name:: rdap_allowed_purposes¶
Claim Description:: This claim describes the set of RDAP query purposes that are available to an identity that is presented for access to a protected RDAP resource.¶
Change Controller:: IETF¶
Reference:: Section 3.1.5.1 of RFC 9560.¶

Claim Name:: rdap_dnt_allowed¶
Claim Description:: This claim contains a JSON boolean literal that describes a "do not track" request for server-side tracking, logging, or recording of an identity that is presented for access to a protected RDAP resource.¶
Change Controller:: IETF¶
Reference:: Section 3.1.5.2 of RFC 9560.¶

9.3. RDAP Query Purpose Registry

IANA has created a new protocol registry to manage RDAP query purpose values.¶

Section at https://www.iana.org/protocols:: Registration Data Access Protocol (RDAP)¶
Registry Name:: Registration Data Access Protocol (RDAP) Query Purpose Values¶
Registration Procedure(s):: This registry is operated under the "Specification Required" policy defined in [RFC8126]. The designated expert must ensure that requests to add values to this registry meet the syntax, value, and description requirements described in this section.¶
Required Information:: Registration requests are described in a specification that's consistent with the "Specification Required" policy defined in [RFC8126]. The specification must include one or more purpose values as described below.¶

Individual purpose values are registered with IANA. Each entry in the registry contains the following fields:¶

Value:: The purpose string value being registered. Value strings can contain uppercase ASCII characters from "A" to "Z", lowercase ASCII characters from "a" to "z", and the underscore ("_") character. Value strings contain at least one character and no more than 64 characters.¶
Description:: One or two sentences in English describing the meaning of the purpose value, how it might be used, and/or how it should be interpreted by clients and servers.¶
Reference:: RFC 9560¶

The set of initial values used to populate the registry as described below are derived from the final report produced by the Expert Working Group on gTLD Directory Services chartered by the Internet Corporation for Assigned Names and Numbers (ICANN) [gTLD].¶

Value:: domainNameControl¶
Description:: Tasks within the scope of this purpose include, for a registrant's own domain name, creating the domain name, updating information about the domain name, transferring the domain name, renewing the domain name, deleting the domain name, maintaining a domain name portfolio, and detecting fraudulent use of the registrant's own contact information.¶
Reference:: RFC 9560¶

Value:: personalDataProtection¶
Description:: Tasks within the scope of this purpose include identifying the accredited privacy or proxy provider associated with a domain name, reporting abuse, requesting reveal, or otherwise contacting the provider.¶
Reference:: RFC 9560¶

Value:: technicalIssueResolution¶
Description:: Tasks within the scope of this purpose include (but are not limited to) working to resolve technical issues, including email delivery issues, DNS resolution failures, and website functionality issues.¶
Reference:: RFC 9560¶

Value:: domainNameCertification¶
Description:: Tasks within the scope of this purpose include a Certification Authority (CA) issuing an X.509 certificate to a subject identified by a domain name.¶
Reference:: RFC 9560¶

Value:: individualInternetUse¶
Description:: Tasks within the scope of this purpose include identifying the organization using a domain name to instill consumer trust or contacting that organization to raise a customer complaint to them or file a complaint about them.¶
Reference:: RFC 9560¶

Value:: businessDomainNamePurchaseOrSale¶
Description:: Tasks within the scope of this purpose include making purchase queries about a domain name, acquiring a domain name from a registrant, and enabling due diligence research.¶
Reference:: RFC 9560¶

Value:: academicPublicInterestDNSResearch¶
Description:: Tasks within the scope of this purpose include academic public interest research studies about domain names published in the registration data service, including public information about the registrant and designated contacts, the domain name's history and status, and domain names registered by a given registrant (reverse query).¶
Reference:: RFC 9560¶

Value:: legalActions¶
Description:: Tasks within the scope of this purpose include investigating possible fraudulent use of a registrant's name or address by other domain names, investigating possible trademark infringement, contacting a registrant's or licensee's legal representative prior to taking legal action, and then taking a legal action if the concern is not satisfactorily addressed.¶
Reference:: RFC 9560¶

Value:: regulatoryAndContractEnforcement¶
Description:: Tasks within the scope of this purpose include investigating the tax authority of businesses with online presences, investigating Uniform Domain-Name Dispute-Resolution Policy (UDRP), investigating contractual compliance, and registering data escrow audits.¶
Reference:: RFC 9560¶

Value:: criminalInvestigationAndDNSAbuseMitigation¶
Description:: Tasks within the scope of this purpose include reporting abuse to someone who can investigate and address that abuse or contacting entities associated with a domain name during an offline criminal investigation.¶
Reference:: RFC 9560¶

Value:: dnsTransparency¶
Description:: Tasks within the scope of this purpose involve querying the registration data made public by registrants to satisfy a wide variety of use cases around informing the public.¶
Reference:: RFC 9560¶

11. References

11.1. Normative References

[HTMLURL]: WHATWG, "URL (Living Standard)", March 2024, <https://url.spec.whatwg.org/>.
[OIDCC]: Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., and C. Mortimore, "OpenID Connect Core 1.0 incorporating errata set 2", December 2023, <https://openid.net/specs/openid-connect-core-1_0.html>.
[OIDCD]: Sakimura, N., Bradley, J., Jones, M., and E. Jay, "OpenID Connect Discovery 1.0 incorporating errata set 2", December 2023, <https://openid.net/specs/openid-connect-discovery-1_0.html>.
[OIDCL]: Jones, M., de Medeiros, B., Agarwal, N., Sakimura, N., and J. Bradley, "OpenID Connect RP-Initiated Logout 1.0", September 2022, <https://openid.net/specs/openid-connect-rpinitiated-1_0.html>.
[OIDCR]: Sakimura, N., Bradley, J., and M. Jones, "OpenID Connect Dynamic Client Registration 1.0 incorporating errata set 2", December 2023, <https://openid.net/specs/openid-connect-registration-1_0.html>.
[RFC2119]: Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/info/rfc2119>.
[RFC6265]: Barth, A., "HTTP State Management Mechanism", RFC 6265, DOI 10.17487/RFC6265, April 2011, <https://www.rfc-editor.org/info/rfc6265>.
[RFC6749]: Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, <https://www.rfc-editor.org/info/rfc6749>.
[RFC6750]: Jones, M. and D. Hardt, "The OAuth 2.0 Authorization Framework: Bearer Token Usage", RFC 6750, DOI 10.17487/RFC6750, October 2012, <https://www.rfc-editor.org/info/rfc6750>.
[RFC7009]: Lodderstedt, T., Ed., Dronia, S., and M. Scurtescu, "OAuth 2.0 Token Revocation", RFC 7009, DOI 10.17487/RFC7009, August 2013, <https://www.rfc-editor.org/info/rfc7009>.
[RFC7480]: Newton, A., Ellacott, B., and N. Kong, "HTTP Usage in the Registration Data Access Protocol (RDAP)", STD 95, RFC 7480, DOI 10.17487/RFC7480, March 2015, <https://www.rfc-editor.org/info/rfc7480>.
[RFC7481]: Hollenbeck, S. and N. Kong, "Security Services for the Registration Data Access Protocol (RDAP)", STD 95, RFC 7481, DOI 10.17487/RFC7481, March 2015, <https://www.rfc-editor.org/info/rfc7481>.
[RFC7519]: Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015, <https://www.rfc-editor.org/info/rfc7519>.
[RFC7617]: Reschke, J., "The 'Basic' HTTP Authentication Scheme", RFC 7617, DOI 10.17487/RFC7617, September 2015, <https://www.rfc-editor.org/info/rfc7617>.
[RFC7662]: Richer, J., Ed., "OAuth 2.0 Token Introspection", RFC 7662, DOI 10.17487/RFC7662, October 2015, <https://www.rfc-editor.org/info/rfc7662>.
[RFC8126]: Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC8126, June 2017, <https://www.rfc-editor.org/info/rfc8126>.
[RFC8174]: Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8628]: Denniss, W., Bradley, J., Jones, M., and H. Tschofenig, "OAuth 2.0 Device Authorization Grant", RFC 8628, DOI 10.17487/RFC8628, August 2019, <https://www.rfc-editor.org/info/rfc8628>.
[RFC8693]: Jones, M., Nadalin, A., Campbell, B., Ed., Bradley, J., and C. Mortimore, "OAuth 2.0 Token Exchange", RFC 8693, DOI 10.17487/RFC8693, January 2020, <https://www.rfc-editor.org/info/rfc8693>.
[RFC9068]: Bertocci, V., "JSON Web Token (JWT) Profile for OAuth 2.0 Access Tokens", RFC 9068, DOI 10.17487/RFC9068, October 2021, <https://www.rfc-editor.org/info/rfc9068>.
[RFC9082]: Hollenbeck, S. and A. Newton, "Registration Data Access Protocol (RDAP) Query Format", STD 95, RFC 9082, DOI 10.17487/RFC9082, June 2021, <https://www.rfc-editor.org/info/rfc9082>.
[RFC9083]: Hollenbeck, S. and A. Newton, "JSON Responses for the Registration Data Access Protocol (RDAP)", STD 95, RFC 9083, DOI 10.17487/RFC9083, June 2021, <https://www.rfc-editor.org/info/rfc9083>.
[RFC9110]: Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "HTTP Semantics", STD 97, RFC 9110, DOI 10.17487/RFC9110, June 2022, <https://www.rfc-editor.org/info/rfc9110>.
[RFC9325]: Sheffer, Y., Saint-Andre, P., and T. Fossati, "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", BCP 195, RFC 9325, DOI 10.17487/RFC9325, November 2022, <https://www.rfc-editor.org/info/rfc9325>.

11.2. Informative References

[gTLD]: Expert Working Group on gTLD Directory Services (EWG), "Final Report from the Expert Working Group on gTLD Directory Services: A Next-Generation Registration Directory Service (RDS)", June 2014, <https://www.icann.org/en/system/files/files/final-report-06jun14-en.pdf>.
[OAUTH-SECURITY]: Lodderstedt, T., Bradley, J., Labunets, A., and D. Fett, "OAuth 2.0 Security Best Current Practice", Work in Progress, Internet-Draft, draft-ietf-oauth-security-topics-26, 21 April 2024, <https://datatracker.ietf.org/doc/html/draft-ietf-oauth-security-topics-26>.
[OIDC]: OpenID, "What is OpenID Connect", <https://openid.net/developers/how-connect-works/>.
[RFC4949]: Shirey, R., "Internet Security Glossary, Version 2", FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007, <https://www.rfc-editor.org/info/rfc4949>.
[RFC8414]: Jones, M., Sakimura, N., and J. Bradley, "OAuth 2.0 Authorization Server Metadata", RFC 8414, DOI 10.17487/RFC8414, June 2018, <https://www.rfc-editor.org/info/rfc8414>.
[RFC8792]: Watsen, K., Auerswald, E., Farrel, A., and Q. Wu, "Handling Long Lines in Content of Internet-Drafts and RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020, <https://www.rfc-editor.org/info/rfc8792>.