RFC 9480 | CMP Updates | November 2023 |
Brockhaus, et al. | Standards Track | [Page] |
This document contains a set of updates to the syntax of Certificate Management Protocol (CMP) version 2 and its HTTP transfer mechanism. This document updates RFCs 4210, 5912, and 6712.¶
The aspects of CMP updated in this document are using EnvelopedData instead of EncryptedValue, clarifying the handling of p10cr messages, improving the crypto agility, as well as adding new general message types, extended key usages to identify certificates for use with CMP, and well-known URI path segments.¶
CMP version 3 is introduced to enable signaling support of EnvelopedData instead of EncryptedValue and signal the use of an explicit hash AlgorithmIdentifier in certConf messages, as far as needed.¶
This is an Internet Standards Track document.¶
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.¶
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc9480.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
While using CMP [RFC4210] in industrial and Internet of Things environments and developing the Lightweight CMP Profile [RFC9483], some limitations were identified in the original CMP specification. This document updates [RFC4210] and [RFC6712] to overcome these limitations.¶
Among other updates, this document improves the crypto agility of CMP, which allows more flexibility for future advances in cryptography.¶
This document also introduces new extended key usages to identify CMP endpoints on registration and certification authorities.¶
The main content of [RFC4210] and [RFC6712] remains unchanged. This document lists all sections that are updated, replaced, or added to the current text of the respective RFCs.¶
The authors acknowledge that the style of the document is hard to read because the original RFCs must be read along with this document to get the complete content. The working group decided to use this approach in order to keep the changes to [RFC4210] and [RFC6712] to the required minimum. This was meant to speed up the editorial process and to minimize the effort spent on reviewing the full text of the original documents.¶
However, [PKIX-CMP] and [HTTP-CMP] are intended to obsolete RFCs 4210 and 6712, respectively; these documents also include the changes listed in this document.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
Technical terminology is used in conformance with [RFC4210], [RFC4211], and [RFC5280]. The following key words are used:¶
The following subsection describes feature updates to [RFC4210]. They are always related to the base specification. Hence, references to the original sections in [RFC4210] are used whenever possible.¶
Insert this section after the current Section 1 of [RFC4210]:¶
1.1. Changes Since RFC 4210¶
The following updates are made in this document:¶
The following subsection introduces a new extended key usage for CMP servers authorized to centrally generate key pairs on behalf of end entities.¶
Insert this section after Section 4.4.3 of [RFC4210]:¶
4.5. Extended Key Usage¶
The extended key usage (EKU) extension indicates the purposes for which the certified key pair may be used. Therefore, it restricts the use of a certificate to specific applications.¶
A CA may want to delegate parts of its duties to other PKI management entities. This section provides a mechanism to both prove this delegation and enable an automated means for checking the authorization of this delegation. Such delegation may also be expressed by other means, e.g., explicit configuration.¶
To offer automatic validation for the delegation of a role by a CA to another entity, the certificates used for CMP message protection or signed data for central key generation MUST be issued by the delegating CA and MUST contain the respective EKUs. This proves the authorization of this entity by delegating CA to act in the given role, as described below.¶
The OIDs to be used for these EKUs are:¶
id-kp-cmcCA OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) kp(3) 27 } id-kp-cmcRA OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) kp(3) 28 } id-kp-cmKGA OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) kp(3) 32 }¶
Note: Section 2.10 of [RFC6402] specifies OIDs for a Certificate Management over CMS (CMC) CA and a CMC RA. As the functionality of a CA and RA is not specific to any certificate management protocol (such as CMC or CMP), these EKUs are reused by CMP.¶
The meaning of the id-kp-cmKGA EKU is as follows:¶
Section 5.1.1 of [RFC4210] describes the PKI message header. This document introduces the new version 3, indicating support of EnvelopedData as specified in Section 2.7 and hashAlg as specified in Section 2.10.¶
Replace the ASN.1 syntax of PKIHeader and the subsequent description of pvno with the following text:¶
PKIHeader ::= SEQUENCE { pvno INTEGER { cmp1999(1), cmp2000(2), cmp2021(3) }, sender GeneralName, recipient GeneralName, messageTime [0] GeneralizedTime OPTIONAL, protectionAlg [1] AlgorithmIdentifier{ALGORITHM, {...}} OPTIONAL, senderKID [2] KeyIdentifier OPTIONAL, recipKID [3] KeyIdentifier OPTIONAL, transactionID [4] OCTET STRING OPTIONAL, senderNonce [5] OCTET STRING OPTIONAL, recipNonce [6] OCTET STRING OPTIONAL, freeText [7] PKIFreeText OPTIONAL, generalInfo [8] SEQUENCE SIZE (1..MAX) OF InfoTypeAndValue OPTIONAL } PKIFreeText ::= SEQUENCE SIZE (1..MAX) OF UTF8String¶
The usage of the protocol version number (pvno) is described in Section 7.¶
Section 5.1.1 of [RFC4210] defines the PKIHeader and id-it OIDs to be used in the generalInfo field. This section introduces id-it-certProfile.¶
Insert this section after Section 5.1.1.2 of [RFC4210]:¶
5.1.1.3. CertProfile¶
This is used by the EE to indicate specific certificate profiles, e.g., when requesting a new certificate or a certificate request template; see Section 5.3.19.16.¶
id-it-certProfile OBJECT IDENTIFIER ::= {id-it 21} CertProfileValue ::= SEQUENCE SIZE (1..MAX) OF UTF8String¶
When used in an ir/cr/kur/genm, the value MUST NOT contain more elements than the number of CertReqMsg or InfoTypeAndValue elements and the certificate profile names refer to the elements in the given order.¶
When used in a p10cr, the value MUST NOT contain multiple certificate profile names.¶
Section 5.1.3.1 of [RFC4210] describes the protection of a PKIMessage based on message authentication code (MAC) using the algorithm id-PasswordBasedMac.¶
Replace the first paragraph with the following text:¶
In this case, the sender and recipient share secret information with sufficient entropy (established via out-of-band means or from a previous PKI management operation). PKIProtection will contain a MAC value and the protectionAlg MAY be one of the options described in CMP Algorithms [RFC9481]. The PasswordBasedMac is specified as follows (see also [RFC4211] and [RFC9045]):¶
Replace the last paragraph with the following text (Note: This fixes Errata ID 2616):¶
Note: It is RECOMMENDED that the fields of PBMParameter remain constant throughout the messages of a single transaction (e.g., ir/ip/certConf/pkiConf) to reduce the overhead associated with PasswordBasedMac computation.¶
Section 5.1.3.4 of [RFC4210] describes the nested message. This document also enables using nested messages for batch-delivery transport of PKI messages between PKI management entities and with mixed body types.¶
Replace the text of the section with the following text:¶
5.1.3.4. Multiple Protection¶
When receiving a protected PKI message, a PKI management entity, such as an RA, MAY forward that message along with adding its own protection (which is a MAC or a signature, depending on the information and certificates shared between the RA and the CA). Additionally, multiple PKI messages MAY be aggregated. There are several use cases for such messages.¶
These use cases are accomplished by nesting the messages within a new PKI message. The structure used is as follows:¶
NestedMessageContent ::= PKIMessages¶
Section 5.2.2 of [RFC4210] describes the use of EncryptedValue to transport encrypted data. This document extends the encryption of data to preferably use EnvelopedData.¶
Replace the text of the section with the following text:¶
5.2.2. Encrypted Values¶
Where encrypted data (in this specification, private keys, certificates, or revocation passphrase) is sent in PKI messages, the EncryptedKey data structure is used.¶
EncryptedKey ::= CHOICE { encryptedValue EncryptedValue, -- deprecated envelopedData [0] EnvelopedData }¶
See Certificate Request Message Format (CRMF) [RFC4211] for EncryptedKey and EncryptedValue syntax and Cryptographic Message Syntax (CMS) [RFC5652] for EnvelopedData syntax. Using the EncryptedKey data structure offers the choice to either use EncryptedValue (for backward compatibility only) or EnvelopedData. The use of the EncryptedValue structure has been deprecated in favor of the EnvelopedData structure. Therefore, it is RECOMMENDED to use EnvelopedData.¶
Note: The EncryptedKey structure defined in CRMF [RFC4211] is reused here, which makes the update backward compatible. Using the new syntax with the untagged default choice EncryptedValue is bits-on-the-wire compatible with the old syntax.¶
To indicate support for EnvelopedData, the pvno cmp2021 has been introduced. Details on the usage of the protocol version number (pvno) are described in Section 7.¶
The EncryptedKey data structure is used in CMP to transport a private key, certificate, or revocation passphrase in encrypted form.¶
EnvelopedData is used as follows:¶
The content of the EnvelopedData structure, as specified in Section 6 of CMS [RFC5652], MUST be encrypted using a newly generated symmetric content-encryption key. This content-encryption key MUST be securely provided to the recipient using one of three key management techniques.¶
The choice of the key management technique to be used by the sender depends on the credential available at the recipient:¶
The following subsection points implementers to [RFC5280] regarding usage of GeneralizedTime.¶
Insert this section after Section 5.2.8.4 of [RFC4210]:¶
5.2.9 GeneralizedTime¶
GeneralizedTime is a standard ASN.1 type and SHALL be used as specified in Section 4.1.2.5.2 of [RFC5280].¶
Section 5.3.4 of [RFC4210] describes the Certification Response. This document updates the syntax by using the parent structure EncryptedKey instead of EncryptedValue, as described in Section 2.7 above. Additionally, it clarifies the certReqId to be used in response to a p10cr message.¶
Replace the ASN.1 syntax with the following text (Note: This also fixes Errata ID 3949 and 4078):¶
CertRepMessage ::= SEQUENCE { caPubs [1] SEQUENCE SIZE (1..MAX) OF CMPCertificate OPTIONAL, response SEQUENCE OF CertResponse } CertResponse ::= SEQUENCE { certReqId INTEGER, status PKIStatusInfo, certifiedKeyPair CertifiedKeyPair OPTIONAL, rspInfo OCTET STRING OPTIONAL -- analogous to the id-regInfo-utf8Pairs string defined -- for regInfo in CertReqMsg [RFC4211] } CertifiedKeyPair ::= SEQUENCE { certOrEncCert CertOrEncCert, privateKey [0] EncryptedKey OPTIONAL, -- See [RFC4211] for comments on encoding. publicationInfo [1] PKIPublicationInfo OPTIONAL } CertOrEncCert ::= CHOICE { certificate [0] CMPCertificate, encryptedCert [1] EncryptedKey }¶
Add the following as a new paragraph right after the ASN.1 syntax:¶
A p10cr message contains exactly one CertificationRequestInfo data structure, as specified in PKCS #10 [RFC2986], but no certReqId. Therefore, the certReqId in the corresponding Certification Response (cp) message MUST be set to -1.¶
Add the following as new paragraphs to the end of the section:¶
The use of EncryptedKey is described in Section 5.2.2.¶
Note: To indicate support for EnvelopedData, the pvno cmp2021 has been introduced. Details on the usage of different protocol version numbers (pvno) are described in Section 7.¶
This section introduces an optional hashAlg field to the CertStatus type used in certConf messages to explicitly specify the hash algorithm for those certificates where no hash algorithm is specified in the signatureAlgorithm field.¶
Replace the ASN.1 Syntax of CertStatus with the following text:¶
CertStatus ::= SEQUENCE { certHash OCTET STRING, certReqId INTEGER, statusInfo PKIStatusInfo OPTIONAL, hashAlg [0] AlgorithmIdentifier{DIGEST-ALGORITHM, {...}} OPTIONAL }¶
The hashAlg field SHOULD be used only in exceptional cases where the signatureAlgorithm of the certificate to be confirmed does not specify a hash algorithm in the OID or in the parameters. In such cases, e.g., for EdDSA, the hashAlg MUST be used to specify the hash algorithm to be used for calculating the certHash value. Otherwise, the certHash value SHALL be computed using the same hash algorithm as used to create and verify the certificate signature. If hashAlg is used, the CMP version indicated by the certConf message header must be cmp2021(3).¶
The following section clarifies the usage of the Signing Key Pair Types on referencing elliptic curves.¶
Insert this note at the end of Section 5.3.19.2 of [RFC4210]:¶
Note: In case several elliptic curves are supported, several id-ecPublicKey elements as defined in [RFC5480] need to be given, one per named curve.¶
The following section clarifies the use of the Encryption/Key Agreement Key Pair Types on referencing elliptic curves.¶
Insert this note at the end of Section 5.3.19.3 of [RFC4210]:¶
Note: In case several elliptic curves are supported, several id-ecPublicKey elements as defined in [RFC5480] need to be given, one per named curve.¶
Section 5.3.19.9 of [RFC4210] describes the provisioning of a revocation passphrase for authenticating a later revocation request. This document updates the handling by using the parent structure EncryptedKey instead of EncryptedValue to transport this information, as described in Section 2.7 above.¶
Replace the text of the section with the following text:¶
5.3.19.9. Revocation Passphrase¶
This MAY be used by the EE to send a passphrase to a CA/RA for the purpose of authenticating a later revocation request (in the case that the appropriate signing private key is no longer available to authenticate the request). See Appendix B for further details on the use of this mechanism.¶
GenMsg: {id-it 12}, EncryptedKey GenRep: {id-it 12}, < absent >¶
The following subsection describes PKI general messages using id-it-caCerts. The intended use is specified in Section 4.3 of the Lightweight CMP Profile [RFC9483].¶
Insert this section after Section 5.3.19.13 of [RFC4210]:¶
5.3.19.14. CA Certificates¶
This MAY be used by the client to get CA certificates.¶
GenMsg: {id-it 17}, < absent > GenRep: {id-it 17}, SEQUENCE SIZE (1..MAX) OF CMPCertificate | < absent >¶
The following subsection describes PKI general messages using id-it-rootCaCert and id-it-rootCaKeyUpdate. The use is specified in Section 4.3 of the Lightweight CMP Profile [RFC9483].¶
Insert this section after the new Section 5.3.19.14:¶
5.3.19.15. Root CA Certificate Update¶
This MAY be used by the client to get an update of a root CA certificate, which is provided in the body of the request message. In contrast to the ckuann message, this approach follows the request/response model.¶
The EE SHOULD reference its current trust anchor in a TrustAnchor structure in the request body, giving the root CA certificate if available; otherwise, the public key value of the trust anchor is given.¶
GenMsg: {id-it 20}, RootCaCertValue | < absent > GenRep: {id-it 18}, RootCaKeyUpdateContent | < absent > RootCaCertValue ::= CMPCertificate RootCaKeyUpdateValue ::= RootCaKeyUpdateContent RootCaKeyUpdateContent ::= SEQUENCE { newWithNew CMPCertificate, newWithOld [0] CMPCertificate OPTIONAL, oldWithNew [1] CMPCertificate OPTIONAL }¶
Note: In contrast to CAKeyUpdAnnContent, this type offers omitting newWithOld and oldWithNew in the GenRep message, depending on the needs of the EE.¶
The following subsection introduces the PKI general message using id-it-certReqTemplate. Details are specified in Section 4.3 of the Lightweight CMP Profile [RFC9483].¶
Insert this section after the new Section 5.3.19.15:¶
5.3.19.16. Certificate Request Template¶
This MAY be used by the client to get a template containing requirements for certificate request attributes and extensions. The controls id-regCtrl-algId and id-regCtrl-rsaKeyLen MAY contain details on the types of subject public keys the CA is willing to certify.¶
The id-regCtrl-algId control MAY be used to identify a cryptographic algorithm (see Section 4.1.2.7 of [RFC5280]) other than rsaEncryption. The algorithm field SHALL identify a cryptographic algorithm. The contents of the optional parameters field will vary according to the algorithm identified. For example, when the algorithm is set to id-ecPublicKey, the parameters identify the elliptic curve to be used; see [RFC5480].¶
The id-regCtrl-rsaKeyLen control SHALL be used for algorithm rsaEncryption and SHALL contain the intended modulus bit length of the RSA key.¶
GenMsg: {id-it 19}, < absent > GenRep: {id-it 19}, CertReqTemplateContent | < absent > CertReqTemplateValue ::= CertReqTemplateContent CertReqTemplateContent ::= SEQUENCE { certTemplate CertTemplate, keySpec Controls OPTIONAL } Controls ::= SEQUENCE SIZE (1..MAX) OF AttributeTypeAndValue id-regCtrl-algId OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) pkip(5) regCtrl(1) 11 } AlgIdCtrl ::= AlgorithmIdentifier{ALGORITHM, {...}} id-regCtrl-rsaKeyLen OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) pkip(5) regCtrl(1) 12 } RsaKeyLenCtrl ::= INTEGER (1..MAX)¶
The CertReqTemplateValue contains the prefilled certTemplate to be used for a future certificate request. The publicKey field in the certTemplate MUST NOT be used. In case the PKI management entity wishes to specify supported public-key algorithms, the keySpec field MUST be used. One AttributeTypeAndValue per supported algorithm or RSA key length MUST be used.¶
Note: The controls ASN.1 type is defined in Section 6 of CRMF [RFC4211].¶
The following subsection introduces the PKI general message using id-it-crlStatusList and id-it-crls. Details are specified in Section 4.3 of the Lightweight CMP Profile [RFC9483]. Insert this section after the new Section 5.3.19.16:¶
5.3.19.17. CRL Update Retrieval¶
This MAY be used by the client to get new CRLs, specifying the source of the CRLs and the thisUpdate value of the latest CRL it already has, if available. A CRL source is given either by a DistributionPointName or the GeneralNames of the issuing CA. The DistributionPointName should be treated as an internal pointer to identify a CRL that the server already has and not as a way to ask the server to fetch CRLs from external locations. The server shall only provide those CRLs that are more recent than the ones indicated by the client.¶
GenMsg: {id-it 22}, SEQUENCE SIZE (1..MAX) OF CRLStatus GenRep: {id-it 23}, SEQUENCE SIZE (1..MAX) OF CertificateList | < absent > CRLSource ::= CHOICE { dpn [0] DistributionPointName, issuer [1] GeneralNames } CRLStatus ::= SEQUENCE { source CRLSource, thisUpdate Time OPTIONAL }¶
Section 5.3.21 of [RFC4210] describes the regular use of error messages. This document adds a use by a PKI management entity to initiate delayed delivery in response to certConf, rr, and genm requests and to error messages.¶
Replace the first sentence of the first paragraph with the following one:¶
This data structure MAY be used by an EE, CA, or RA to convey error information and by a PKI management entity to initiate delayed delivery of responses.¶
Replace the second paragraph with the following text:¶
This message MAY be generated at any time during a PKI transaction. If the client sends this request, the server MUST respond with a PKIConfirm response or another ErrorMsg if any part of the header is not valid. In case a PKI management entity sends an error message to the EE with the pKIStatusInfo field containing the status "waiting", the EE will initiate polling as described in Section 5.3.22. Otherwise, both sides MUST treat this message as the end of the transaction (if a transaction is in progress).¶
Section 5.3.22 of [RFC4210] describes when and how polling messages are used for ir, cr, and kur messages. This document extends the polling mechanism for outstanding responses to any kind of request message. This update also fixes the inconsistent use of the terms 'pReq' vs. 'pollReq' and 'pRep' vs. 'pollRep'.¶
Replace Section 5.3.22 of [RFC4210] with following text:¶
This pair of messages is intended to handle scenarios in which the client needs to poll the server to determine the status of an outstanding response (i.e., when the "waiting" PKIStatus has been received).¶
PollReqContent ::= SEQUENCE OF SEQUENCE { certReqId INTEGER } PollRepContent ::= SEQUENCE OF SEQUENCE { certReqId INTEGER, checkAfter INTEGER, -- time in seconds reason PKIFreeText OPTIONAL }¶
In response to an ir, cr, p10cr, or kur request message, polling is initiated with an ip, cp, or kup response message containing status "waiting". For any type of request message, polling can be initiated with an error response messages with status "waiting". The following clauses describe how polling messages are used. It is assumed that multiple certConf messages can be sent during transactions. There will be one sent in response to each ip, cp, or kup that contains a CertStatus for an issued certificate.¶
The following client-side state machine describes polling for individual CertResponse elements.¶
START | v Send ir | ip v Check status of returned <------------------------+ certs | | | +------------------------>|<------------------+ | | | | | | (issued) v (waiting) | | Add to <----------- Check CertResponse ------> Add to | conf list for each certificate pending list | / | / | (conf list) / (empty conf list) | / ip | / +-----------------+ (empty pending list) / | pollRep END <---- Send certConf Send pollReq---------->Wait | ^ ^ | | | | | +-----------------+ +---------------+ (pending list)¶
In the following exchange, the end entity is enrolling for two certificates in one request.¶
Step End Entity PKI -------------------------------------------------------------------- 1 Format ir 2 -> ir -> 3 Handle ir 4 Manual intervention is required for both certs 5 <- ip <- 6 Process ip 7 Format pollReq 8 -> pollReq -> 9 Check status of cert requests 10 Certificates not ready 11 Format pollRep 12 <- pollRep <- 13 Wait 14 Format pollReq 15 -> pollReq -> 16 Check status of cert requests 17 One certificate is ready 18 Format ip 19 <- ip <- 20 Handle ip 21 Format certConf 22 -> certConf -> 23 Handle certConf 24 Format ack 25 <- pkiConf <- 26 Format pollReq 27 -> pollReq -> 28 Check status of certificate 29 Certificate is ready 30 Format ip 31 <- ip <- 31 Handle ip 32 Format certConf 33 -> certConf -> 34 Handle certConf 35 Format ack 36 <- pkiConf <-¶
The following client-side state machine describes polling for a complete response message.¶
Start | | Send request | +----------- Receive response ------------+ | | | ip/cp/kup/error with | other | status "waiting" | response | | v | +------> Polling | | | | | | Send pollReq | | | Receive response | | | | | pollRep | other response | +-----------+------------------->+<-------------------+ | v Handle response | v End¶
In the following exchange, the end entity is sending a general message request, and the response is delayed by the server.¶
Step End Entity PKI -------------------------------------------------------------------- 1 Format genm 2 -> genm -> 3 Handle genm 4 delay in response is necessary 5 Format error message "waiting" with certReqId set to -1 6 <- error <- 7 Process error 8 Format pollReq 9 -> pollReq -> 10 Check status of original request general message response not ready 11 Format pollRep 12 <- pollRep <- 13 Wait 14 Format pollReq 15 -> pollReq -> 16 Check status of original request general message response is ready 17 Format genp 18 <- genp <- 19 Handle genp¶
Section 7 of [RFC4210] describes the use of CMP versions. This document describes the handling of the additional CMP version cmp2021, which is introduced to indicate support of EnvelopedData and hashAlg.¶
Replace the text of the second paragraph with the following text:¶
If a client knows the protocol version(s) supported by the server (e.g., from a previous PKIMessage exchange or via some out-of-band means), then it MUST send a PKIMessage with the highest version supported by both it and the server. If a client does not know what version(s) the server supports, then it MUST send a PKIMessage using the highest version it supports with the following exception. Version cmp2021 SHOULD only be used if cmp2021 syntax is needed for the request being sent or for the expected response.¶
Note: Using cmp2000 as the default pvno is done to avoid extra message exchanges for version negotiation and to foster compatibility with cmp2000 implementations. Version cmp2021 syntax is only needed if a message exchange uses hashAlg (in CertStatus) or EnvelopedData.¶
Section 7.1.1 of [RFC4210] describes the behavior of a client sending a cmp2000 message talking to a cmp1999 server, as specified in [RFC2510]. This document extends the section to clients with any higher version than cmp1999.¶
Replace the first sentence of Section 7.1.1 of [RFC4210] with the following text:¶
If, after sending a message with a protocol version number higher than cmp1999, a client receives an ErrorMsgContent with a version of cmp1999, then it MUST abort the current transaction.¶
The following subsection addresses the risk arising from reusing the CA private key for CMP message protection.¶
Insert this section after Section 8.3 of [RFC4210] (Note: This fixes Errata ID 5731):¶
8.4. Private Keys for Certificate Signing and CMP Message Protection¶
A CA should not reuse its certificate signing key for other purposes, such as protecting CMP responses and TLS connections. This way, exposure to other parts of the system and the number of uses of this particularly critical key are reduced to a minimum.¶
The following subsection addresses the risk arising from low entropy of random numbers, asymmetric keys, and shared secret information.¶
Insert this section after the new Section 8.4:¶
8.5. Entropy of Random Numbers, Key Pairs, and Shared Secret Information¶
Implementations must generate nonces and private keys from random input. The use of inadequate pseudorandom number generators (PRNGs) to generate cryptographic keys can result in little or no security. An attacker may find it much easier to reproduce the PRNG environment that produced the keys and to search the resulting small set of possibilities than brute-force searching the whole key space. As an example of predictable random numbers, see [CVE-2008-0166]; consequences of low-entropy random numbers are discussed in Mining Your Ps and Qs [MiningPsQs]. The generation of quality random numbers is difficult. ISO/IEC 20543:2019 [ISO.20543-2019], NIST SP 800-90A Rev.1 [NIST_SP_800_90Ar1], BSI AIS 31 V2.0 [AIS31], and other specifications offer valuable guidance in this area.¶
If shared secret information is generated by a cryptographically secure random number generator (CSRNG), it is safe to assume that the entropy of the shared secret information equals its bit length. If no CSRNG is used, the entropy of shared secret information depends on the details of the generation process and cannot be measured securely after it has been generated. If user-generated passwords are used as shared secret information, their entropy cannot be measured and are typically insufficient for protected delivery of centrally generated keys or trust anchors.¶
If the entropy of shared secret information protecting the delivery of a centrally generated key pair is known, it should not be less than the security strength of that key pair; if the shared secret information is reused for different key pairs, the security of the shared secret information should exceed the security strength of each individual key pair.¶
For the case of a PKI management operation that delivers a new trust anchor (e.g., a root CA certificate) using caPubs or genm that is (a) not concluded in a timely manner or (b) where the shared secret information is reused for several key management operations, the entropy of the shared secret information, if known, should not be less than the security strength of the trust anchor being managed by the operation. The shared secret information should have an entropy that at least matches the security strength of the key material being managed by the operation. Certain use cases may require shared secret information that may be of a low security strength, e.g., a human-generated password. It is RECOMMENDED that such secret information be limited to a single PKI management operation.¶
The following subsection addresses the risk arising from in-band provisioning of new trust anchors in a PKI management operation.¶
Insert this section after the new Section 8.5:¶
8.6. Trust Anchor Provisioning Using CMP Messages¶
A provider of trust anchors, which may be an RA involved in configuration management of its clients, MUST NOT include to-be-trusted CA certificates in a CMP message unless the specific deployment scenario can ensure that it is adequate that the receiving EE trusts these certificates, e.g., by loading them into its trust store.¶
Whenever an EE receives in a CMP message a CA certificate to be used as a trust anchor (for example in the caPubs field of a certificate response or in a general response), it MUST properly authenticate the message sender with existing trust anchor information without requiring the new trust anchors included in the message.¶
Additionally, the EE MUST verify that the sender is an authorized source of trust anchors. This authorization is governed by local policy and typically indicated using shared secret information or with a signature-based message protection using a certificate issued by a PKI that is explicitly authorized for this purpose.¶
The following subsection addresses the security considerations to follow when authorizing requests for certificates containing specific EKUs.¶
Insert this section after new Section 8.6:¶
8.7. Authorizing Requests for Certificates with Specific EKUs¶
When a CA issues a certificate containing extended key usage extensions as defined in Section 4.5, this expresses delegation of an authorization that originally is only with the CA certificate itself. Such delegation is a very sensitive action in a PKI and therefore special care must be taken when approving such certificate requests to ensure that only legitimate entities receive a certificate containing such an EKU.¶
Appendix B of [RFC4210] describes the use of the revocation passphrase. As this document updates [RFC4210] to utilize the parent structure EncryptedKey instead of EncryptedValue as described in Section 2.7 above, the description is updated accordingly.¶
Replace the first bullet point of this section with the following text:¶
Replace the third bullet point of this section with the following text:¶
Appendix C of [RFC4210] provides clarifications to the request message behavior. As this document updates [RFC4210] to utilize the parent structure EncryptedKey instead of EncryptedValue as described in Section 2.7 above, the description is updated accordingly.¶
Replace the comment within the ASN.1 syntax coming after the definition of POPOSigningKey with the following text (Note: This fixes Errata ID 2615):¶
-- ********** -- * For the purposes of this specification, the ASN.1 comment -- * given in [RFC4211] pertains not only to certTemplate but -- * also to the altCertTemplate control. -- ********** -- * The signature (using "algorithmIdentifier") is on the -- * DER-encoded value of poposkInput (i.e., the "value" OCTETs -- * of the POPOSigningKeyInput DER). NOTE: If CertReqMsg -- * certReq certTemplate (or the altCertTemplate control) -- * contains the subject and publicKey values, then poposkInput -- * MUST be omitted and the signature MUST be computed on the -- * DER-encoded value of CertReqMsg certReq (or the DER- -- * encoded value of AltCertTemplate). If -- * certTemplate/altCertTemplate does not contain both the -- * subject and public key values (i.e., if it contains only -- * one of these or neither), then poposkInput MUST be present -- * and MUST be signed. -- **********¶
Replace the ASN.1 syntax of POPOPrivKey with the following text:¶
POPOPrivKey ::= CHOICE { thisMessage [0] BIT STRING, -- deprecated subsequentMessage [1] SubsequentMessage, dhMAC [2] BIT STRING, -- deprecated agreeMAC [3] PKMACValue, encryptedKey [4] EnvelopedData } -- ********** -- * When using CMP V2, the encrypted value MUST be transferred in -- * the thisMessage field that is given as BIT STRING in [RFC4211], -- * but it requires EncryptedValue. Therefore, this document makes -- * the behavioral clarification for CMP V2 of specifying that the -- * contents of "thisMessage" MUST be encoded as an -- * EncryptedValue and then wrapped in a BIT STRING. -- * When using CMP V3, the encrypted value MUST be transferred -- * in the encryptedKey field, as specified in Section 5.2.2. -- **********¶
Appendix D.1 of [RFC4210] provides general rules for interpretation of the PKI management messages profiles specified in Appendices D and E of [RFC4210]. This document updates a sentence regarding the new protocol version cmp2021.¶
Replace the last sentence of the first paragraph of the section with the following text:¶
Mandatory fields are not mentioned if they have an obvious value (e.g., in this version of these profiles, pvno is always cmp2000).¶
Appendix D.2 of [RFC4210] provides a list of algorithms that implementations must support when claiming conformance with PKI management message profiles, as specified in Appendix D.2 of CMP [RFC4210]. This document redirects to the new algorithm profile, as specified in Section 7.1 of CMP Algorithms [RFC9481].¶
Replace the text of the section with the following text:¶
D.2. Algorithm Use Profile¶
For specifications of algorithm identifiers and respective conventions for conforming implementations, please refer to Section 7.1 of CMP Algorithms [RFC9481].¶
Appendix D.4 of [RFC4210] provides the initial registration/certification scheme. This scheme shall continue using EncryptedValue for backward compatibility reasons.¶
Replace the line specifying protectionAlg of the Initialization Response message with the following text (Note: This fixes Errata ID 5201):¶
protectionAlg MSG_MAC_ALG¶
Replace the comment after the privateKey field of crc[1].certifiedKeyPair in the syntax of the Initialization Response message with the following text:¶
-- see Appendix C (Request Message Behavioral Clarifications) -- for backward compatibility reasons, use EncryptedValue¶
To indicate and explain why delayed delivery of all kinds of PKIMessages may be handled at transfer level and/or at CMP level, the introduction of [RFC6712] is updated.¶
Replace the third paragraph of this section with the following text:¶
In addition to reliable transport, CMP requires connection and error handling from the transfer protocol, which is all covered by HTTP. Additionally, delayed delivery of CMP response messages may be handled at transfer level, regardless of the message contents. Since this document extends the polling mechanism specified in the second version of CMP [RFC4210] to cover all types of PKI management transactions, delays detected at application level may also be handled within CMP, using pollReq and pollRep messages.¶
The following subsection describes feature updates to [RFC6712]. They are related to the base specification. Hence, references to the original sections in [RFC6712] are used whenever possible.¶
Insert this section after the current Section 1 of [RFC6712]:¶
1.1 Changes Since RFC 6712¶
The following updates are made in this document:¶
Section 3.6 of [RFC6712] specifies the used HTTP URIs. This document introduces the HTTP path '/.well-known/cmp' and extends the URIs.¶
Replace the text of the section with the following text:¶
3.6. HTTP Request-URI¶
Each CMP server on a PKI management entity supporting HTTP or HTTPS transfer MUST support the use of the path prefix '/.well-known/' as defined in [RFC8615] and the registered name 'cmp' to ease interworking in a multi-vendor environment.¶
The CMP client needs to be configured with sufficient information to form the CMP server URI. This is at least the authority portion of the URI, e.g., 'www.example.com:80', or the full operation path segment of the PKI management entity. Additionally, OPTIONAL path segments MAY be added after the registered application name as part of the full operation path to provide further distinction. The path segment 'p' followed by an arbitraryLabel <name> could, for example, support the differentiation of specific CAs or certificate profiles. Further path segments, e.g., as specified in the Lightweight CMP Profile [RFC9483], could indicate PKI management operations using an operationLabel <operation>. A valid, full CMP URI can look like this:¶
This document updates the ASN.1 modules of Appendix F of [RFC4210] and Section 9 of [RFC5912] as shown in Appendixes A.1 and A.2 of this document, respectively. The OIDs 99 (id-mod-cmp2021-88) and 100 (id-mod-cmp2021-02) have been registered in the "SMI Security for PKIX Module Identifier" registry to identify the updated ASN.1 modules.¶
This document updates the IANA Consideration sections of [RFC4210] by adding this content.¶
IANA has registered the following new entry in the "SMI Security for PKIX Extended Key Purpose" registry (see <https://www.iana.org/assignments/smi-numbers>, as defined in [RFC7299]:¶
Decimal | Description | References |
---|---|---|
32 | id-kp-cmKGA | RFC 9480 |
IANA has registered the following new entries in the "SMI Security for PKIX CMP Information Types" registry (see <https://www.iana.org/assignments/smi-numbers>), as defined in [RFC7299]:¶
Decimal | Description | References |
---|---|---|
17 | id-it-caCerts | RFC 9480 |
18 | id-it-rootCaKeyUpdate | RFC 9480 |
19 | id-it-certReqTemplate | RFC 9480 |
20 | id-it-rootCaCert | RFC 9480 |
21 | id-it-certProfile | RFC 9480 |
22 | id-it-crlStatusList | RFC 9480 |
23 | id-it-crls | RFC 9480 |
IANA has registered the following new entries in the "SMI Security for PKIX CRMF Registration Controls" registry (see <https://www.iana.org/assignments/smi-numbers>), as defined in [RFC7299]:¶
Decimal | Description | References |
---|---|---|
11 | id-regCtrl-algId | RFC 9480 |
12 | id-regCtrl-rsaKeyLen | RFC 9480 |
This document contains an update to the IANA Considerations sections of [RFC6712] by adding this content.¶
IANA has registered the following new entry in the "Well-Known URIs" registry (see <https://www.iana.org/assignments/well-known-uris>), as defined in [RFC8615]:¶
This document defines a new protocol registry group entitled "Certificate Management Protocol (CMP)" (at <https://www.iana.org/assignments/cmp>) with a new "CMP Well-Known URI Path Segments" registry containing three columns: Path Segment, Description, and Reference. New items can be added using the Specification Required [RFC8615] process. The initial entry of this registry is:¶
The security considerations of [RFC4210] are extended in Section 2.22 to Section 2.24. No security considerations updates of [RFC6712] were required.¶
This section contains the updated ASN.1 module for [RFC4210]. This module replaces the module in Appendix F of that document. Although a 2002 ASN.1 module is provided, this 1988 ASN.1 module remains the normative module, as per the policy of the PKIX Working Group.¶
PKIXCMP {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-cmp2021-88(99)} DEFINITIONS EXPLICIT TAGS ::= BEGIN -- EXPORTS ALL -- IMPORTS Certificate, CertificateList, Extensions, Name, Time, AlgorithmIdentifier, id-kp --, UTF8String -- -- if required; otherwise, comment out FROM PKIX1Explicit88 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-pkix1-explicit-88(18)} -- The import of Name is added to define CertificationRequest -- instead of importing it from PKCS #10 [RFC2986]. DistributionPointName, GeneralNames, GeneralName, KeyIdentifier FROM PKIX1Implicit88 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-pkix1-implicit-88(19)} CertTemplate, PKIPublicationInfo, EncryptedKey, CertId, CertReqMessages, Controls, AttributeTypeAndValue, id-regCtrl FROM PKIXCRMF-2005 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-crmf2005(36)} -- The import of EncryptedKey is added due to the updates made -- in CMP Updates [RFC9480]. EncryptedValue does not need to -- be imported anymore and is therefore removed here. -- Also, see the behavioral clarifications to CRMF codified in -- Appendix C of this specification. EnvelopedData, SignedData, Attribute FROM CryptographicMessageSyntax2004 { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0) cms-2004(24) } -- The import of EnvelopedData and SignedData is added due to -- the updates made in CMP Updates [RFC9480]. -- The import of Attribute is added to define -- CertificationRequest instead of importing it from -- PKCS #10 [RFC2986]. ; -- The rest of the module contains locally defined OIDs and -- constructs: CMPCertificate ::= CHOICE { x509v3PKCert Certificate } -- This syntax, while bits-on-the-wire compatible with the -- standard X.509 definition of "Certificate", allows the -- possibility of future certificate types (such as X.509 -- attribute certificates, card-verifiable -- certificates, or other kinds of certificates) within this -- Certificate Management Protocol, should a need ever arise to -- support such generality. Those implementations that do not -- foresee a need to ever support other certificate types MAY, if -- they wish, comment out the above structure and "uncomment" the -- following one prior to compiling this ASN.1 module. (Note that -- interoperability with implementations that don't do this will be -- unaffected by this change.) -- CMPCertificate ::= Certificate PKIMessage ::= SEQUENCE { header PKIHeader, body PKIBody, protection [0] PKIProtection OPTIONAL, extraCerts [1] SEQUENCE SIZE (1..MAX) OF CMPCertificate OPTIONAL } PKIMessages ::= SEQUENCE SIZE (1..MAX) OF PKIMessage PKIHeader ::= SEQUENCE { pvno INTEGER { cmp1999(1), cmp2000(2), cmp2021(3) }, sender GeneralName, -- identifies the sender recipient GeneralName, -- identifies the intended recipient messageTime [0] GeneralizedTime OPTIONAL, -- time of production of this message (used when the sender -- believes that the transport will be "suitable", i.e., -- that the time will still be meaningful upon receipt) protectionAlg [1] AlgorithmIdentifier OPTIONAL, -- algorithm used for the calculation of protection bits senderKID [2] KeyIdentifier OPTIONAL, recipKID [3] KeyIdentifier OPTIONAL, -- to identify specific keys used for protection transactionID [4] OCTET STRING OPTIONAL, -- identifies the transaction, i.e., this will be the same in -- corresponding request, response, certConf, and PKIConf -- messages senderNonce [5] OCTET STRING OPTIONAL, recipNonce [6] OCTET STRING OPTIONAL, -- nonces used to provide replay protection, senderNonce -- is inserted by the creator of this message; recipNonce -- is a nonce previously inserted in a related message by -- the intended recipient of this message. freeText [7] PKIFreeText OPTIONAL, -- this may be used to indicate context-specific instructions -- (this field is intended for human consumption) generalInfo [8] SEQUENCE SIZE (1..MAX) OF InfoTypeAndValue OPTIONAL -- this may be used to convey context-specific information -- (this field not primarily intended for human consumption) } PKIFreeText ::= SEQUENCE SIZE (1..MAX) OF UTF8String -- text encoded as a UTF-8 string [RFC3629] PKIBody ::= CHOICE { -- message-specific body elements ir [0] CertReqMessages, --Initialization Request ip [1] CertRepMessage, --Initialization Response cr [2] CertReqMessages, --Certification Request cp [3] CertRepMessage, --Certification Response p10cr [4] CertificationRequest, --imported from [RFC2986] popdecc [5] POPODecKeyChallContent, --pop Challenge popdecr [6] POPODecKeyRespContent, --pop Response kur [7] CertReqMessages, --Key Update Request kup [8] CertRepMessage, --Key Update Response krr [9] CertReqMessages, --Key Recovery Request krp [10] KeyRecRepContent, --Key Recovery Response rr [11] RevReqContent, --Revocation Request rp [12] RevRepContent, --Revocation Response ccr [13] CertReqMessages, --Cross-Cert. Request ccp [14] CertRepMessage, --Cross-Cert. Response ckuann [15] CAKeyUpdAnnContent, --CA Key Update Ann. cann [16] CertAnnContent, --Certificate Ann. rann [17] RevAnnContent, --Revocation Ann. crlann [18] CRLAnnContent, --CRL Announcement pkiconf [19] PKIConfirmContent, --Confirmation nested [20] NestedMessageContent, --Nested Message genm [21] GenMsgContent, --General Message genp [22] GenRepContent, --General Response error [23] ErrorMsgContent, --Error Message certConf [24] CertConfirmContent, --Certificate Confirm pollReq [25] PollReqContent, --Polling Request pollRep [26] PollRepContent --Polling Response } PKIProtection ::= BIT STRING ProtectedPart ::= SEQUENCE { header PKIHeader, body PKIBody } id-PasswordBasedMac OBJECT IDENTIFIER ::= {1 2 840 113533 7 66 13} PBMParameter ::= SEQUENCE { salt OCTET STRING, -- Note: Implementations MAY wish to limit acceptable sizes -- of this string to values appropriate for their environment -- in order to reduce the risk of denial-of-service attacks. owf AlgorithmIdentifier, -- AlgId for a One-Way Function (OWF) iterationCount INTEGER, -- number of times the OWF is applied -- Note: Implementations MAY wish to limit acceptable sizes -- of this integer to values appropriate for their environment -- in order to reduce the risk of denial-of-service attacks. mac AlgorithmIdentifier -- the MAC AlgId (e.g., HMAC-SHA256, AES-GMAC [RFC9481], } -- or HMAC [RFC2104, RFC2202]) id-DHBasedMac OBJECT IDENTIFIER ::= {1 2 840 113533 7 66 30} DHBMParameter ::= SEQUENCE { owf AlgorithmIdentifier, -- AlgId for a One-Way Function mac AlgorithmIdentifier -- the MAC AlgId (e.g., HMAC-SHA256, AES-GMAC [RFC9481], } -- or HMAC [RFC2104, RFC2202]) NestedMessageContent ::= PKIMessages PKIStatus ::= INTEGER { accepted (0), -- you got exactly what you asked for grantedWithMods (1), -- you got something like what you asked for; the -- requester is responsible for ascertaining the differences rejection (2), -- you don't get it, more information elsewhere in the message waiting (3), -- the request body part has not yet been processed; expect to -- hear more later (note: proper handling of this status -- response MAY use the polling req/rep PKIMessages specified -- in Section 5.3.22 of [RFC4210]; alternatively, polling in the -- underlying transport layer MAY have some utility in this -- regard) revocationWarning (4), -- this message contains a warning that a revocation is -- imminent revocationNotification (5), -- notification that a revocation has occurred keyUpdateWarning (6) -- update already done for the oldCertId specified in -- CertReqMsg } PKIFailureInfo ::= BIT STRING { -- since we can fail in more than one way! -- More codes may be added in the future if/when required. badAlg (0), -- unrecognized or unsupported algorithm identifier badMessageCheck (1), -- integrity check failed (e.g., signature did not verify) badRequest (2), -- transaction not permitted or supported badTime (3), -- messageTime was not sufficiently close to the system time, -- as defined by local policy badCertId (4), -- no certificate could be found matching the provided criteria badDataFormat (5), -- the data submitted has the wrong format wrongAuthority (6), -- the authority indicated in the request is different from the -- one creating the response token incorrectData (7), -- the requester's data is incorrect (for notary services) missingTimeStamp (8), -- when the timestamp is missing but should be there -- (by policy) badPOP (9), -- the proof-of-possession failed certRevoked (10), -- the certificate has already been revoked certConfirmed (11), -- the certificate has already been confirmed wrongIntegrity (12), -- not valid integrity, based on the password instead of the -- signature or vice versa badRecipientNonce (13), -- not valid recipient nonce, either missing or wrong value timeNotAvailable (14), -- the time source of the Time Stamping Authority (TSA) is -- not available unacceptedPolicy (15), -- the requested TSA policy is not supported by the TSA unacceptedExtension (16), -- the requested extension is not supported by the TSA addInfoNotAvailable (17), -- the additional information requested could not be -- understood or is not available badSenderNonce (18), -- not valid sender nonce, either missing or wrong size badCertTemplate (19), -- not valid cert. template or missing mandatory information signerNotTrusted (20), -- signer of the message unknown or not trusted transactionIdInUse (21), -- the transaction identifier is already in use unsupportedVersion (22), -- the version of the message is not supported notAuthorized (23), -- the sender was not authorized to make the preceding -- request or perform the preceding action systemUnavail (24), -- the request cannot be handled due to system unavailability systemFailure (25), -- the request cannot be handled due to system failure duplicateCertReq (26) -- the certificate cannot be issued because a duplicate -- certificate already exists } PKIStatusInfo ::= SEQUENCE { status PKIStatus, statusString PKIFreeText OPTIONAL, failInfo PKIFailureInfo OPTIONAL } OOBCert ::= CMPCertificate OOBCertHash ::= SEQUENCE { hashAlg [0] AlgorithmIdentifier OPTIONAL, certId [1] CertId OPTIONAL, hashVal BIT STRING -- hashVal is calculated over the DER encoding of the -- self-signed certificate with the identifier certID. } POPODecKeyChallContent ::= SEQUENCE OF Challenge -- one Challenge per encryption key certification request (in the -- same order as these requests appear in CertReqMessages) Challenge ::= SEQUENCE { owf AlgorithmIdentifier OPTIONAL, -- MUST be present in the first Challenge; MAY be omitted in -- any subsequent Challenge in POPODecKeyChallContent (if -- omitted, then the owf used in the immediately preceding -- Challenge is to be used) witness OCTET STRING, -- the result of applying the One-Way Function (owf) to a -- randomly generated INTEGER, A (Note that a different -- INTEGER MUST be used for each Challenge.) challenge OCTET STRING -- the encryption (under the public key for which the cert. -- request is being made) of Rand } -- Rand was added in CMP Updates [RFC9480] Rand ::= SEQUENCE { -- Rand is encrypted under the public key to form the challenge -- in POPODecKeyChallContent int INTEGER, -- the randomly generated INTEGER A (above) sender GeneralName -- the sender's name (as included in PKIHeader) } POPODecKeyRespContent ::= SEQUENCE OF INTEGER -- One INTEGER per encryption key certification request (in the -- same order as these requests appear in CertReqMessages). The -- retrieved INTEGER A (above) is returned to the sender of the -- corresponding Challenge. CertRepMessage ::= SEQUENCE { caPubs [1] SEQUENCE SIZE (1..MAX) OF CMPCertificate OPTIONAL, response SEQUENCE OF CertResponse } CertificationRequest ::= SEQUENCE { certificationRequestInfo SEQUENCE { version INTEGER, subject Name, subjectPublicKeyInfo SEQUENCE { algorithm AlgorithmIdentifier, subjectPublicKey BIT STRING }, attributes [0] IMPLICIT SET OF Attribute }, signatureAlgorithm AlgorithmIdentifier, signature BIT STRING } CertResponse ::= SEQUENCE { certReqId INTEGER, -- to match this response with the corresponding request (a value -- of -1 is to be used if certReqId is not specified in the -- corresponding request, which can only be a p10cr) status PKIStatusInfo, certifiedKeyPair CertifiedKeyPair OPTIONAL, rspInfo OCTET STRING OPTIONAL -- analogous to the id-regInfo-utf8Pairs string defined -- for regInfo in CertReqMsg [RFC4211] } CertifiedKeyPair ::= SEQUENCE { certOrEncCert CertOrEncCert, privateKey [0] EncryptedKey OPTIONAL, -- See [RFC4211] for comments on encoding. -- Changed from Encrypted Value to EncryptedKey as a CHOICE of -- EncryptedValue and EnvelopedData due to the changes made in -- CMP Updates [RFC9480]. -- Using the choice EncryptedValue is bit-compatible to the -- syntax without this change. publicationInfo [1] PKIPublicationInfo OPTIONAL } CertOrEncCert ::= CHOICE { certificate [0] CMPCertificate, encryptedCert [1] EncryptedKey -- Changed from Encrypted Value to EncryptedKey as a CHOICE of -- EncryptedValue and EnvelopedData due to the changes made in -- CMP Updates [RFC9480]. -- Using the choice EncryptedValue is bit-compatible to the -- syntax without this change. } KeyRecRepContent ::= SEQUENCE { status PKIStatusInfo, newSigCert [0] CMPCertificate OPTIONAL, caCerts [1] SEQUENCE SIZE (1..MAX) OF CMPCertificate OPTIONAL, keyPairHist [2] SEQUENCE SIZE (1..MAX) OF CertifiedKeyPair OPTIONAL } RevReqContent ::= SEQUENCE OF RevDetails RevDetails ::= SEQUENCE { certDetails CertTemplate, -- allows the requester to specify as much as they can about -- the cert. for which revocation is requested -- (e.g., for cases in which serialNumber is not available) crlEntryDetails Extensions OPTIONAL -- requested crlEntryExtensions } RevRepContent ::= SEQUENCE { status SEQUENCE SIZE (1..MAX) OF PKIStatusInfo, -- in the same order as was sent in RevReqContent revCerts [0] SEQUENCE SIZE (1..MAX) OF CertId OPTIONAL, -- IDs for which revocation was requested -- (same order as status) crls [1] SEQUENCE SIZE (1..MAX) OF CertificateList OPTIONAL -- the resulting CRLs (there may be more than one) } CAKeyUpdAnnContent ::= SEQUENCE { oldWithNew CMPCertificate, -- old pub signed with new priv newWithOld CMPCertificate, -- new pub signed with old priv newWithNew CMPCertificate -- new pub signed with new priv } CertAnnContent ::= CMPCertificate RevAnnContent ::= SEQUENCE { status PKIStatus, certId CertId, willBeRevokedAt GeneralizedTime, badSinceDate GeneralizedTime, crlDetails Extensions OPTIONAL -- extra CRL details (e.g., crl number, reason, location, etc.) } CRLAnnContent ::= SEQUENCE OF CertificateList CertConfirmContent ::= SEQUENCE OF CertStatus CertStatus ::= SEQUENCE { certHash OCTET STRING, -- the hash of the certificate, using the same hash algorithm -- as is used to create and verify the certificate signature certReqId INTEGER, -- to match this confirmation with the corresponding req/rep statusInfo PKIStatusInfo OPTIONAL, hashAlg [0] AlgorithmIdentifier OPTIONAL -- the hash algorithm to use for calculating certHash -- SHOULD NOT be used in all cases where the AlgorithmIdentifier -- of the certificate signature specifies a hash algorithm } PKIConfirmContent ::= NULL -- CertReqTemplateContent, id-regCtrl-algId, id-regCtrl-algId, and -- id-regCtrl-rsaKeyLen were added in CMP Updates [RFC9480] CertReqTemplateContent ::= SEQUENCE { certTemplate CertTemplate, -- prefilled certTemplate structure elements -- The SubjectPublicKeyInfo field in the certTemplate MUST NOT -- be used. keySpec Controls OPTIONAL -- MAY be used to specify supported algorithms -- Controls ::= SEQUENCE SIZE (1..MAX) OF AttributeTypeAndValue -- as specified in CRMF [RFC4211] } id-regCtrl-altCertTemplate OBJECT IDENTIFIER ::= { id-regCtrl 7 } AltCertTemplate ::= AttributeTypeAndValue -- specifies a template for a certificate other than an X.509v3 -- public key certificate id-regCtrl-algId OBJECT IDENTIFIER ::= { id-regCtrl 11 } AlgIdCtrl ::= AlgorithmIdentifier -- SHALL be used to specify supported algorithms other than RSA id-regCtrl-rsaKeyLen OBJECT IDENTIFIER ::= { id-regCtrl 12 } RsaKeyLenCtrl ::= INTEGER (1..MAX) -- SHALL be used to specify supported RSA key lengths -- RootCaKeyUpdateContent, CRLSource, and CRLStatus were added in -- CMP Updates [RFC9480] RootCaKeyUpdateContent ::= SEQUENCE { newWithNew CMPCertificate, -- new root CA certificate newWithOld [0] CMPCertificate OPTIONAL, -- X.509 certificate containing the new public root CA key -- signed with the old private root CA key oldWithNew [1] CMPCertificate OPTIONAL -- X.509 certificate containing the old public root CA key -- signed with the new private root CA key } CRLSource ::= CHOICE { dpn [0] DistributionPointName, issuer [1] GeneralNames } CRLStatus ::= SEQUENCE { source CRLSource, thisUpdate Time OPTIONAL } InfoTypeAndValue ::= SEQUENCE { infoType OBJECT IDENTIFIER, infoValue ANY DEFINED BY infoType OPTIONAL } -- Example InfoTypeAndValue contents include, but are not limited -- to, the following (uncomment in this ASN.1 module and use as -- appropriate for a given environment): -- -- id-it-caProtEncCert OBJECT IDENTIFIER ::= {id-it 1} -- CAProtEncCertValue ::= CMPCertificate -- id-it-signKeyPairTypes OBJECT IDENTIFIER ::= {id-it 2} -- SignKeyPairTypesValue ::= SEQUENCE SIZE (1..MAX) OF -- AlgorithmIdentifier -- id-it-encKeyPairTypes OBJECT IDENTIFIER ::= {id-it 3} -- EncKeyPairTypesValue ::= SEQUENCE SIZE (1..MAX) OF -- AlgorithmIdentifier -- id-it-preferredSymmAlg OBJECT IDENTIFIER ::= {id-it 4} -- PreferredSymmAlgValue ::= AlgorithmIdentifier -- id-it-caKeyUpdateInfo OBJECT IDENTIFIER ::= {id-it 5} -- CAKeyUpdateInfoValue ::= CAKeyUpdAnnContent -- id-it-currentCRL OBJECT IDENTIFIER ::= {id-it 6} -- CurrentCRLValue ::= CertificateList -- id-it-unsupportedOIDs OBJECT IDENTIFIER ::= {id-it 7} -- UnsupportedOIDsValue ::= SEQUENCE SIZE (1..MAX) OF -- OBJECT IDENTIFIER -- id-it-keyPairParamReq OBJECT IDENTIFIER ::= {id-it 10} -- KeyPairParamReqValue ::= OBJECT IDENTIFIER -- id-it-keyPairParamRep OBJECT IDENTIFIER ::= {id-it 11} -- KeyPairParamRepValue ::= AlgorithmIdentifier -- id-it-revPassphrase OBJECT IDENTIFIER ::= {id-it 12} -- RevPassphraseValue ::= EncryptedKey -- - Changed from Encrypted Value to EncryptedKey as a CHOICE -- - of EncryptedValue and EnvelopedData due to the changes -- - made in CMP Updates [RFC9480]. -- - Using the choice EncryptedValue is bit-compatible to the -- - syntax without this change. -- id-it-implicitConfirm OBJECT IDENTIFIER ::= {id-it 13} -- ImplicitConfirmValue ::= NULL -- id-it-confirmWaitTime OBJECT IDENTIFIER ::= {id-it 14} -- ConfirmWaitTimeValue ::= GeneralizedTime -- id-it-origPKIMessage OBJECT IDENTIFIER ::= {id-it 15} -- OrigPKIMessageValue ::= PKIMessages -- id-it-suppLangTags OBJECT IDENTIFIER ::= {id-it 16} -- SuppLangTagsValue ::= SEQUENCE OF UTF8String -- id-it-caCerts OBJECT IDENTIFIER ::= {id-it 17} -- CaCertsValue ::= SEQUENCE SIZE (1..MAX) OF -- CMPCertificate -- - id-it-caCerts added in CMP Updates [RFC9480] -- id-it-rootCaKeyUpdate OBJECT IDENTIFIER ::= {id-it 18} -- RootCaKeyUpdateValue ::= RootCaKeyUpdateContent -- - id-it-rootCaKeyUpdate added in CMP Updates [RFC9480] -- id-it-certReqTemplate OBJECT IDENTIFIER ::= {id-it 19} -- CertReqTemplateValue ::= CertReqTemplateContent -- - id-it-certReqTemplate added in CMP Updates [RFC9480] -- id-it-rootCaCert OBJECT IDENTIFIER ::= {id-it 20} -- RootCaCertValue ::= CMPCertificate -- - id-it-rootCaCert added in CMP Updates [RFC9480] -- id-it-certProfile OBJECT IDENTIFIER ::= {id-it 21} -- CertProfileValue ::= SEQUENCE SIZE (1..MAX) OF -- UTF8String -- - id-it-certProfile added in CMP Updates [RFC9480] -- id-it-crlStatusList OBJECT IDENTIFIER ::= {id-it 22} -- CRLStatusListValue ::= SEQUENCE SIZE (1..MAX) OF -- CRLStatus -- - id-it-crlStatusList added in CMP Updates [RFC9480] -- id-it-crls OBJECT IDENTIFIER ::= {id-it 23} -- CRLsValue ::= SEQUENCE SIZE (1..MAX) OF -- CertificateList -- - id-it-crls added in CMP Updates [RFC9480] -- -- where -- -- id-pkix OBJECT IDENTIFIER ::= { -- iso(1) identified-organization(3) -- dod(6) internet(1) security(5) mechanisms(5) pkix(7)} -- and -- id-it OBJECT IDENTIFIER ::= {id-pkix 4} -- -- -- This construct MAY also be used to define new PKIX Certificate -- Management Protocol request and response messages or general- -- purpose (e.g., announcement) messages for future needs or for -- specific environments. GenMsgContent ::= SEQUENCE OF InfoTypeAndValue -- May be sent by EE, RA, or CA (depending on message content). -- The OPTIONAL infoValue parameter of InfoTypeAndValue will -- typically be omitted for some of the examples given above. -- The receiver is free to ignore any contained OIDs that it -- does not recognize. If sent from EE to CA, the empty set -- indicates that the CA may send -- any/all information that it wishes. GenRepContent ::= SEQUENCE OF InfoTypeAndValue -- The receiver MAY ignore any contained OIDs that it does not -- recognize. ErrorMsgContent ::= SEQUENCE { pKIStatusInfo PKIStatusInfo, errorCode INTEGER OPTIONAL, -- implementation-specific error codes errorDetails PKIFreeText OPTIONAL -- implementation-specific error details } PollReqContent ::= SEQUENCE OF SEQUENCE { certReqId INTEGER } PollRepContent ::= SEQUENCE OF SEQUENCE { certReqId INTEGER, checkAfter INTEGER, -- time in seconds reason PKIFreeText OPTIONAL } -- -- Extended key usage extension for PKI entities used in CMP -- operations, added due to the changes made in -- CMP Updates [RFC9480] -- The EKUs for the CA and RA are reused from CMC, as defined in -- [RFC6402] -- -- id-kp-cmcCA OBJECT IDENTIFIER ::= { id-kp 27 } -- id-kp-cmcRA OBJECT IDENTIFIER ::= { id-kp 28 } id-kp-cmKGA OBJECT IDENTIFIER ::= { id-kp 32 } -- There is no 1988 ASN.1 module of PKCS #9 available to import the -- syntax of the localKeyId attribute type and value from. Therefore, -- the syntax is added here as needed for the updates made in -- CMP Updates [RFC9480]. pkcs-9 OBJECT IDENTIFIER ::= {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) 9} pkcs-9-at-localKeyId OBJECT IDENTIFIER ::= {pkcs-9 21} LocalKeyIdValue ::= OCTET STRING END -- of CMP module¶
This section contains the updated 2002 ASN.1 module for [RFC5912]. This module replaces the module in Section 9 of [RFC5912]. The module contains those changes to the normative ASN.1 module from Appendix F of [RFC4210] that were to update to the 2002 ASN.1 standard done in [RFC5912], as well as changes made in this document.¶
PKIXCMP-2021 { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-cmp2021-02(100) } DEFINITIONS EXPLICIT TAGS ::= BEGIN IMPORTS AttributeSet{}, SingleAttribute{}, Extensions{}, EXTENSION, ATTRIBUTE FROM PKIX-CommonTypes-2009 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkixCommon-02(57)} AlgorithmIdentifier{}, SIGNATURE-ALGORITHM, ALGORITHM, DIGEST-ALGORITHM, MAC-ALGORITHM FROM AlgorithmInformation-2009 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-algorithmInformation-02(58)} Certificate, CertificateList, Time, id-kp FROM PKIX1Explicit-2009 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkix1-explicit-02(51)} DistributionPointName, GeneralNames, GeneralName, KeyIdentifier FROM PKIX1Implicit-2009 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkix1-implicit-02(59)} CertTemplate, PKIPublicationInfo, EncryptedKey, CertId, CertReqMessages, Controls, RegControlSet, id-regCtrl FROM PKIXCRMF-2009 { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-crmf2005-02(55) } -- The import of EncryptedKey is added due to the updates made -- in CMP Updates [RFC9480]. EncryptedValue does not need to -- be imported anymore and is therefore removed here. -- See also the behavioral clarifications to CRMF codified in -- Appendix C of this specification. CertificationRequest FROM PKCS-10 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkcs10-2009(69)} -- (specified in [RFC2986] with 1993 ASN.1 syntax and IMPLICIT -- tags). Alternatively, implementers may directly include -- the syntax of [RFC2986] in this module. localKeyId FROM PKCS-9 {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) modules(0) pkcs-9(1)} -- The import of localKeyId is added due to the updates made in -- CMP Updates [RFC9480]. EnvelopedData, SignedData FROM CryptographicMessageSyntax-2009 {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0) id-mod-cms-2004-02(41)} -- The import of EnvelopedData and SignedData is added due to -- the updates made in CMP Updates [RFC9480]. ; -- The rest of the module contains locally defined OIDs and -- constructs: CMPCertificate ::= CHOICE { x509v3PKCert Certificate, ... } -- This syntax, while bits-on-the-wire compatible with the -- standard X.509 definition of "Certificate", allows the -- possibility of future certificate types (such as X.509 -- attribute certificates, card-verifiable -- certificates, or other kinds of certificates) within this -- Certificate Management Protocol, should a need ever arise to -- support such generality. Those implementations that do not -- foresee a need to ever support other certificate types MAY, if -- they wish, comment out the above structure and "uncomment" the -- following one prior to compiling this ASN.1 module. (Note that -- interoperability with implementations that don't do this will be -- unaffected by this change.) -- CMPCertificate ::= Certificate PKIMessage ::= SEQUENCE { header PKIHeader, body PKIBody, protection [0] PKIProtection OPTIONAL, extraCerts [1] SEQUENCE SIZE (1..MAX) OF CMPCertificate OPTIONAL } PKIMessages ::= SEQUENCE SIZE (1..MAX) OF PKIMessage PKIHeader ::= SEQUENCE { pvno INTEGER { cmp1999(1), cmp2000(2), cmp2012(3) }, sender GeneralName, -- identifies the sender recipient GeneralName, -- identifies the intended recipient messageTime [0] GeneralizedTime OPTIONAL, -- time of production of this message (used when the sender -- believes that the transport will be "suitable", i.e., -- that the time will still be meaningful upon receipt) protectionAlg [1] AlgorithmIdentifier{ALGORITHM, {...}} OPTIONAL, -- algorithm used for the calculation of protection bits senderKID [2] KeyIdentifier OPTIONAL, recipKID [3] KeyIdentifier OPTIONAL, -- to identify specific keys used for protection transactionID [4] OCTET STRING OPTIONAL, -- identifies the transaction, i.e., this will be the same in -- corresponding request, response, certConf, and PKIConf -- messages senderNonce [5] OCTET STRING OPTIONAL, recipNonce [6] OCTET STRING OPTIONAL, -- nonces used to provide replay protection, senderNonce -- is inserted by the creator of this message; recipNonce -- is a nonce previously inserted in a related message by -- the intended recipient of this message. freeText [7] PKIFreeText OPTIONAL, -- this may be used to indicate context-specific instructions -- (this field is intended for human consumption) generalInfo [8] SEQUENCE SIZE (1..MAX) OF InfoTypeAndValue OPTIONAL -- this may be used to convey context-specific information -- (this field not primarily intended for human consumption) } PKIFreeText ::= SEQUENCE SIZE (1..MAX) OF UTF8String -- text encoded as a UTF-8 string [RFC3629] PKIBody ::= CHOICE { -- message-specific body elements ir [0] CertReqMessages, --Initialization Request ip [1] CertRepMessage, --Initialization Response cr [2] CertReqMessages, --Certification Request cp [3] CertRepMessage, --Certification Response p10cr [4] CertificationRequest, --imported from [RFC2986] popdecc [5] POPODecKeyChallContent, --pop Challenge popdecr [6] POPODecKeyRespContent, --pop Response kur [7] CertReqMessages, --Key Update Request kup [8] CertRepMessage, --Key Update Response krr [9] CertReqMessages, --Key Recovery Request krp [10] KeyRecRepContent, --Key Recovery Response rr [11] RevReqContent, --Revocation Request rp [12] RevRepContent, --Revocation Response ccr [13] CertReqMessages, --Cross-Cert. Request ccp [14] CertRepMessage, --Cross-Cert. Response ckuann [15] CAKeyUpdAnnContent, --CA Key Update Ann. cann [16] CertAnnContent, --Certificate Ann. rann [17] RevAnnContent, --Revocation Ann. crlann [18] CRLAnnContent, --CRL Announcement pkiconf [19] PKIConfirmContent, --Confirmation nested [20] NestedMessageContent, --Nested Message genm [21] GenMsgContent, --General Message genp [22] GenRepContent, --General Response error [23] ErrorMsgContent, --Error Message certConf [24] CertConfirmContent, --Certificate Confirm pollReq [25] PollReqContent, --Polling Request pollRep [26] PollRepContent --Polling Response } PKIProtection ::= BIT STRING ProtectedPart ::= SEQUENCE { header PKIHeader, body PKIBody } id-PasswordBasedMac OBJECT IDENTIFIER ::= { iso(1) member-body(2) usa(840) nt(113533) nsn(7) algorithms(66) 13 } PBMParameter ::= SEQUENCE { salt OCTET STRING, -- Note: Implementations MAY wish to limit acceptable sizes -- of this string to values appropriate for their environment -- in order to reduce the risk of denial-of-service attacks. owf AlgorithmIdentifier{DIGEST-ALGORITHM, {...}}, -- AlgId for a One-Way Function iterationCount INTEGER, -- number of times the OWF is applied -- Note: Implementations MAY wish to limit acceptable sizes -- of this integer to values appropriate for their environment -- in order to reduce the risk of denial-of-service attacks. mac AlgorithmIdentifier{MAC-ALGORITHM, {...}} -- the MAC AlgId (e.g., HMAC-SHA256, AES-GMAC [RFC9481], -- or HMAC [RFC2104, RFC2202]) } id-DHBasedMac OBJECT IDENTIFIER ::= { iso(1) member-body(2) usa(840) nt(113533) nsn(7) algorithms(66) 30 } DHBMParameter ::= SEQUENCE { owf AlgorithmIdentifier{DIGEST-ALGORITHM, {...}}, -- AlgId for a One-Way Function mac AlgorithmIdentifier{MAC-ALGORITHM, {...}} -- the MAC AlgId (e.g., HMAC-SHA256, AES-GMAC [RFC9481], -- or HMAC [RFC2104, RFC2202]) } PKIStatus ::= INTEGER { accepted (0), -- you got exactly what you asked for grantedWithMods (1), -- you got something like what you asked for; the -- requester is responsible for ascertaining the differences rejection (2), -- you don't get it, more information elsewhere in the message waiting (3), -- the request body part has not yet been processed; expect to -- hear more later (note: proper handling of this status -- response MAY use the polling req/rep PKIMessages specified -- in Section 5.3.22 of [RFC4210]; alternatively, polling in the -- underlying transport layer MAY have some utility in this -- regard) revocationWarning (4), -- this message contains a warning that a revocation is -- imminent revocationNotification (5), -- notification that a revocation has occurred keyUpdateWarning (6) -- update already done for the oldCertId specified in -- CertReqMsg } PKIFailureInfo ::= BIT STRING { -- since we can fail in more than one way! -- More codes may be added in the future if/when required. badAlg (0), -- unrecognized or unsupported algorithm identifier badMessageCheck (1), -- integrity check failed (e.g., signature did not verify) badRequest (2), -- transaction not permitted or supported badTime (3), -- messageTime was not sufficiently close to the system time, -- as defined by local policy badCertId (4), -- no certificate could be found matching the provided criteria badDataFormat (5), -- the data submitted has the wrong format wrongAuthority (6), -- the authority indicated in the request is different from the -- one creating the response token incorrectData (7), -- the requester's data is incorrect (for notary services) missingTimeStamp (8), -- when the timestamp is missing but should be there -- (by policy) badPOP (9), -- the proof-of-possession failed certRevoked (10), -- the certificate has already been revoked certConfirmed (11), -- the certificate has already been confirmed wrongIntegrity (12), -- not valid integrity, based on the password instead of the -- signature or vice versa badRecipientNonce (13), -- not valid recipient nonce, either missing or wrong value timeNotAvailable (14), -- the TSA's time source is not available unacceptedPolicy (15), -- the requested TSA policy is not supported by the TSA unacceptedExtension (16), -- the requested extension is not supported by the TSA addInfoNotAvailable (17), -- the additional information requested could not be -- understood or is not available badSenderNonce (18), -- not valid sender nonce, either missing or wrong size badCertTemplate (19), -- not valid cert. template or missing mandatory information signerNotTrusted (20), -- signer of the message unknown or not trusted transactionIdInUse (21), -- the transaction identifier is already in use unsupportedVersion (22), -- the version of the message is not supported notAuthorized (23), -- the sender was not authorized to make the preceding -- request or perform the preceding action systemUnavail (24), -- the request cannot be handled due to system unavailability systemFailure (25), -- the request cannot be handled due to system failure duplicateCertReq (26) -- the certificate cannot be issued because a duplicate -- certificate already exists } PKIStatusInfo ::= SEQUENCE { status PKIStatus, statusString PKIFreeText OPTIONAL, failInfo PKIFailureInfo OPTIONAL } OOBCert ::= CMPCertificate OOBCertHash ::= SEQUENCE { hashAlg [0] AlgorithmIdentifier{DIGEST-ALGORITHM, {...}} OPTIONAL, certId [1] CertId OPTIONAL, hashVal BIT STRING -- hashVal is calculated over the DER encoding of the -- self-signed certificate with the identifier certID. } POPODecKeyChallContent ::= SEQUENCE OF Challenge -- One Challenge per encryption key certification request (in the -- same order as these requests appear in CertReqMessages) Challenge ::= SEQUENCE { owf AlgorithmIdentifier{DIGEST-ALGORITHM, {...}} OPTIONAL, -- MUST be present in the first Challenge; MAY be omitted in -- any subsequent Challenge in POPODecKeyChallContent (if -- omitted, then the owf used in the immediately preceding -- Challenge is to be used) witness OCTET STRING, -- the result of applying the One-Way Function (owf) to a -- randomly generated INTEGER, A (Note that a different -- INTEGER MUST be used for each Challenge.) challenge OCTET STRING -- the encryption (under the public key for which the cert. -- request is being made) of Rand } -- Rand was added in CMP Updates [RFC9480] Rand ::= SEQUENCE { -- Rand is encrypted under the public key to form the challenge -- in POPODecKeyChallContent int INTEGER, -- the randomly generated INTEGER A (above) sender GeneralName -- the sender's name (as included in PKIHeader) } POPODecKeyRespContent ::= SEQUENCE OF INTEGER -- One INTEGER per encryption key certification request (in the -- same order as these requests appear in CertReqMessages). The -- retrieved INTEGER A (above) is returned to the sender of the -- corresponding Challenge. CertRepMessage ::= SEQUENCE { caPubs [1] SEQUENCE SIZE (1..MAX) OF CMPCertificate OPTIONAL, response SEQUENCE OF CertResponse } CertResponse ::= SEQUENCE { certReqId INTEGER, -- to match this response with the corresponding request (a value -- of -1 is to be used if certReqId is not specified in the -- corresponding request, which can only be a p10cr) status PKIStatusInfo, certifiedKeyPair CertifiedKeyPair OPTIONAL, rspInfo OCTET STRING OPTIONAL -- analogous to the id-regInfo-utf8Pairs string defined -- for regInfo in CertReqMsg [RFC4211] } CertifiedKeyPair ::= SEQUENCE { certOrEncCert CertOrEncCert, privateKey [0] EncryptedKey OPTIONAL, -- See [RFC4211] for comments on encoding. -- Changed from Encrypted Value to EncryptedKey as a CHOICE of -- EncryptedValue and EnvelopedData due to the changes made in -- CMP Updates [RFC9480]. -- Using the choice EncryptedValue is bit-compatible to the -- syntax without this change. publicationInfo [1] PKIPublicationInfo OPTIONAL } CertOrEncCert ::= CHOICE { certificate [0] CMPCertificate, encryptedCert [1] EncryptedKey -- Changed from Encrypted Value to EncryptedKey as a CHOICE of -- EncryptedValue and EnvelopedData due to the changes made in -- CMP Updates [RFC9480]. -- Using the choice EncryptedValue is bit-compatible to the -- syntax without this change. } KeyRecRepContent ::= SEQUENCE { status PKIStatusInfo, newSigCert [0] CMPCertificate OPTIONAL, caCerts [1] SEQUENCE SIZE (1..MAX) OF CMPCertificate OPTIONAL, keyPairHist [2] SEQUENCE SIZE (1..MAX) OF CertifiedKeyPair OPTIONAL } RevReqContent ::= SEQUENCE OF RevDetails RevDetails ::= SEQUENCE { certDetails CertTemplate, -- allows the requester to specify as much as they can about -- the cert. for which revocation is requested -- (e.g., for cases in which serialNumber is not available) crlEntryDetails Extensions{{...}} OPTIONAL -- requested crlEntryExtensions } RevRepContent ::= SEQUENCE { status SEQUENCE SIZE (1..MAX) OF PKIStatusInfo, -- in the same order as was sent in RevReqContent revCerts [0] SEQUENCE SIZE (1..MAX) OF CertId OPTIONAL, -- IDs for which revocation was requested -- (same order as status) crls [1] SEQUENCE SIZE (1..MAX) OF CertificateList OPTIONAL -- the resulting CRLs (there may be more than one) } CAKeyUpdAnnContent ::= SEQUENCE { oldWithNew CMPCertificate, -- old pub signed with new priv newWithOld CMPCertificate, -- new pub signed with old priv newWithNew CMPCertificate -- new pub signed with new priv } CertAnnContent ::= CMPCertificate RevAnnContent ::= SEQUENCE { status PKIStatus, certId CertId, willBeRevokedAt GeneralizedTime, badSinceDate GeneralizedTime, crlDetails Extensions{{...}} OPTIONAL -- extra CRL details (e.g., crl number, reason, location, etc.) } CRLAnnContent ::= SEQUENCE OF CertificateList PKIConfirmContent ::= NULL NestedMessageContent ::= PKIMessages -- CertReqTemplateContent, AttributeTypeAndValue, -- ExpandedRegControlSet, id-regCtrl-altCertTemplate, -- AltCertTemplate, regCtrl-algId, id-regCtrl-algId, AlgIdCtrl, -- regCtrl-rsaKeyLen, id-regCtrl-rsaKeyLen, and RsaKeyLenCtrl -- were added in CMP Updates [RFC9480] CertReqTemplateContent ::= SEQUENCE { certTemplate CertTemplate, -- prefilled certTemplate structure elements -- The SubjectPublicKeyInfo field in the certTemplate MUST NOT -- be used. keySpec Controls OPTIONAL -- MAY be used to specify supported algorithms -- Controls ::= SEQUENCE SIZE (1..MAX) OF AttributeTypeAndValue -- as specified in CRMF [RFC4211] } AttributeTypeAndValue ::= SingleAttribute{{ ... }} ExpandedRegControlSet ATTRIBUTE ::= { RegControlSet | regCtrl-altCertTemplate | regCtrl-algId | regCtrl-rsaKeyLen, ... } regCtrl-altCertTemplate ATTRIBUTE ::= { TYPE AltCertTemplate IDENTIFIED BY id-regCtrl-altCertTemplate } id-regCtrl-altCertTemplate OBJECT IDENTIFIER ::= { id-regCtrl 7 } AltCertTemplate ::= AttributeTypeAndValue -- specifies a template for a certificate other than an X.509v3 -- public key certificate regCtrl-algId ATTRIBUTE ::= { TYPE AlgIdCtrl IDENTIFIED BY id-regCtrl-algId } id-regCtrl-algId OBJECT IDENTIFIER ::= { id-regCtrl 11 } AlgIdCtrl ::= AlgorithmIdentifier{ALGORITHM, {...}} -- SHALL be used to specify supported algorithms other than RSA regCtrl-rsaKeyLen ATTRIBUTE ::= { TYPE RsaKeyLenCtrl IDENTIFIED BY id-regCtrl-rsaKeyLen } id-regCtrl-rsaKeyLen OBJECT IDENTIFIER ::= { id-regCtrl 12 } RsaKeyLenCtrl ::= INTEGER (1..MAX) -- SHALL be used to specify supported RSA key lengths -- RootCaKeyUpdateContent, CRLSource, and CRLStatus were added in -- CMP Updates [RFC9480] RootCaKeyUpdateContent ::= SEQUENCE { newWithNew CMPCertificate, -- new root CA certificate newWithOld [0] CMPCertificate OPTIONAL, -- X.509 certificate containing the new public root CA key -- signed with the old private root CA key oldWithNew [1] CMPCertificate OPTIONAL -- X.509 certificate containing the old public root CA key -- signed with the new private root CA key } CRLSource ::= CHOICE { dpn [0] DistributionPointName, issuer [1] GeneralNames } CRLStatus ::= SEQUENCE { source CRLSource, thisUpdate Time OPTIONAL } INFO-TYPE-AND-VALUE ::= TYPE-IDENTIFIER InfoTypeAndValue ::= SEQUENCE { infoType INFO-TYPE-AND-VALUE. &id({SupportedInfoSet}), infoValue INFO-TYPE-AND-VALUE. &Type({SupportedInfoSet}{@infoType}) } SupportedInfoSet INFO-TYPE-AND-VALUE ::= { ... } -- Example InfoTypeAndValue contents include, but are not limited -- to, the following (uncomment in this ASN.1 module and use as -- appropriate for a given environment): -- -- id-it-caProtEncCert OBJECT IDENTIFIER ::= {id-it 1} -- CAProtEncCertValue ::= CMPCertificate -- id-it-signKeyPairTypes OBJECT IDENTIFIER ::= {id-it 2} -- SignKeyPairTypesValue ::= SEQUENCE SIZE (1..MAX) OF -- AlgorithmIdentifier{{...}} -- id-it-encKeyPairTypes OBJECT IDENTIFIER ::= {id-it 3} -- EncKeyPairTypesValue ::= SEQUENCE SIZE (1..MAX) OF -- AlgorithmIdentifier{{...}} -- id-it-preferredSymmAlg OBJECT IDENTIFIER ::= {id-it 4} -- PreferredSymmAlgValue ::= AlgorithmIdentifier{{...}} -- id-it-caKeyUpdateInfo OBJECT IDENTIFIER ::= {id-it 5} -- CAKeyUpdateInfoValue ::= CAKeyUpdAnnContent -- id-it-currentCRL OBJECT IDENTIFIER ::= {id-it 6} -- CurrentCRLValue ::= CertificateList -- id-it-unsupportedOIDs OBJECT IDENTIFIER ::= {id-it 7} -- UnsupportedOIDsValue ::= SEQUENCE SIZE (1..MAX) OF -- OBJECT IDENTIFIER -- id-it-keyPairParamReq OBJECT IDENTIFIER ::= {id-it 10} -- KeyPairParamReqValue ::= OBJECT IDENTIFIER -- id-it-keyPairParamRep OBJECT IDENTIFIER ::= {id-it 11} -- KeyPairParamRepValue ::= AlgorithmIdentifier{{...}} -- id-it-revPassphrase OBJECT IDENTIFIER ::= {id-it 12} -- RevPassphraseValue ::= EncryptedKey -- - Changed from Encrypted Value to EncryptedKey as a CHOICE -- - of EncryptedValue and EnvelopedData due to the changes -- - made in CMP Updates [RFC9480] -- - Using the choice EncryptedValue is bit-compatible to -- - the syntax without this change -- id-it-implicitConfirm OBJECT IDENTIFIER ::= {id-it 13} -- ImplicitConfirmValue ::= NULL -- id-it-confirmWaitTime OBJECT IDENTIFIER ::= {id-it 14} -- ConfirmWaitTimeValue ::= GeneralizedTime -- id-it-origPKIMessage OBJECT IDENTIFIER ::= {id-it 15} -- OrigPKIMessageValue ::= PKIMessages -- id-it-suppLangTags OBJECT IDENTIFIER ::= {id-it 16} -- SuppLangTagsValue ::= SEQUENCE OF UTF8String -- id-it-caCerts OBJECT IDENTIFIER ::= {id-it 17} -- CaCertsValue ::= SEQUENCE SIZE (1..MAX) OF -- CMPCertificate -- - id-it-caCerts added in CMP Updates [RFC9480] -- id-it-rootCaKeyUpdate OBJECT IDENTIFIER ::= {id-it 18} -- RootCaKeyUpdateValue ::= RootCaKeyUpdateContent -- - id-it-rootCaKeyUpdate added in CMP Updates [RFC9480] -- id-it-certReqTemplate OBJECT IDENTIFIER ::= {id-it 19} -- CertReqTemplateValue ::= CertReqTemplateContent -- - id-it-certReqTemplate added in CMP Updates [RFC9480] -- id-it-rootCaCert OBJECT IDENTIFIER ::= {id-it 20} -- RootCaCertValue ::= CMPCertificate -- - id-it-rootCaCert added in CMP Updates [RFC9480] -- id-it-certProfile OBJECT IDENTIFIER ::= {id-it 21} -- CertProfileValue ::= SEQUENCE SIZE (1..MAX) OF -- UTF8String -- - id-it-certProfile added in CMP Updates [RFC9480] -- id-it-crlStatusList OBJECT IDENTIFIER ::= {id-it 22} -- CRLStatusListValue ::= SEQUENCE SIZE (1..MAX) OF -- CRLStatus -- - id-it-crlStatusList added in CMP Updates [RFC9480] -- id-it-crls OBJECT IDENTIFIER ::= {id-it 23} -- CRLsValue ::= SEQUENCE SIZE (1..MAX) OF -- CertificateList -- - id-it-crls added in CMP Updates [RFC9480] -- -- where -- -- id-pkix OBJECT IDENTIFIER ::= { -- iso(1) identified-organization(3) -- dod(6) internet(1) security(5) mechanisms(5) pkix(7)} -- and -- id-it OBJECT IDENTIFIER ::= {id-pkix 4} -- -- -- This construct MAY also be used to define new PKIX Certificate -- Management Protocol request and response messages or general- -- purpose (e.g., announcement) messages for future needs or for -- specific environments. GenMsgContent ::= SEQUENCE OF InfoTypeAndValue -- May be sent by EE, RA, or CA (depending on message content). -- The OPTIONAL infoValue parameter of InfoTypeAndValue will -- typically be omitted for some of the examples given above. -- The receiver is free to ignore any contained OIDs that it -- does not recognize. If sent from EE to CA, the empty set -- indicates that the CA may send -- any/all information that it wishes. GenRepContent ::= SEQUENCE OF InfoTypeAndValue -- The receiver MAY ignore any contained OIDs that it does not -- recognize. ErrorMsgContent ::= SEQUENCE { pKIStatusInfo PKIStatusInfo, errorCode INTEGER OPTIONAL, -- implementation-specific error codes errorDetails PKIFreeText OPTIONAL -- implementation-specific error details } CertConfirmContent ::= SEQUENCE OF CertStatus CertStatus ::= SEQUENCE { certHash OCTET STRING, -- the hash of the certificate, using the same hash algorithm -- as is used to create and verify the certificate signature certReqId INTEGER, -- to match this confirmation with the corresponding req/rep statusInfo PKIStatusInfo OPTIONAL, hashAlg [0] AlgorithmIdentifier{DIGEST-ALGORITHM, {...}} OPTIONAL -- the hash algorithm to use for calculating certHash -- SHOULD NOT be used in all cases where the AlgorithmIdentifier -- of the certificate signature specifies a hash algorithm } PollReqContent ::= SEQUENCE OF SEQUENCE { certReqId INTEGER } PollRepContent ::= SEQUENCE OF SEQUENCE { certReqId INTEGER, checkAfter INTEGER, -- time in seconds reason PKIFreeText OPTIONAL } -- -- Extended key usage extension for PKI entities used in CMP -- operations, added due to the changes made in -- CMP Updates [RFC9480] -- The EKUs for the CA and RA are reused from CMC, as defined in -- [RFC6402] -- -- id-kp-cmcCA OBJECT IDENTIFIER ::= { id-kp 27 } -- id-kp-cmcRA OBJECT IDENTIFIER ::= { id-kp 28 } id-kp-cmKGA OBJECT IDENTIFIER ::= { id-kp 32 } END¶
Special thanks goes to Jim Schaad for his guidance and the inspiration to structure and write this document like [RFC6402], which updates CMC. Special thanks also goes to Russ Housley, Lijun Liao, Martin Peylo, and Tomas Gustavsson for reviewing and providing valuable suggestions on improving this document.¶
We also thank all reviewers of this document for their valuable feedback.¶