Network Working Group R. Housley
Request for Comments: 5485 Vigil Security
Category: Informational March 2009
Digital Signatures on Internet-Draft Documents
Status of This Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents in effect on the date of
publication of this document (http://trustee.ietf.org/license-info).
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document.
Abstract
This document specifies the conventions for digital signatures on
Internet-Drafts. The Cryptographic Message Syntax (CMS) is used to
create a detached signature, which is stored in a separate companion
file so that no existing utilities are impacted by the addition of
the digital signature.
Housley Informational [Page 1]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
1. Introduction
This document specifies the conventions for storing a digital
signature on Internet-Drafts. The Cryptographic Message Syntax (CMS)
[CMS] is used to create a detached signature. The signature is
stored in a separate companion file so that no existing utilities are
impacted by the addition of the digital signature.
Shortly after the IETF Secretariat posts the Internet-Draft in the
repository, the digital signature is generated and posted as a
companion file in the same repository. The digital signature allows
anyone to confirm that the contents of the Internet-Draft have not
been altered since the time that the document was posted in the
repository.
The signature of the IETF Secretariat is intended to provide a
straightforward way for anyone to determine whether a particular file
contains the document that was made available by the IETF
Secretariat. The signing-time included by the IETF Secretariat
provides the wall-clock time; it is not intended to provide a trusted
timestamp.
1.1. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [STDWORDS].
1.2. ASN.1
The CMS uses Abstract Syntax Notation One (ASN.1) [X.680]. ASN.1 is
a formal notation used for describing data protocols, regardless of
the programming language used by the implementation. Encoding rules
describe how the values defined in ASN.1 will be represented for
transmission. The Basic Encoding Rules (BER) [X.690] are the most
widely employed rule set, but they offer more than one way to
represent data structures. For example, both definite-length
encoding and indefinite-length encoding are supported. This
flexibility is not desirable when digital signatures are used. As a
result, the Distinguished Encoding Rules (DER) [X.690] were invented.
DER is a subset of BER that ensures a single way to represent a given
value. For example, DER always employs definite-length encoding.
Housley Informational [Page 2]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
2. Internet-Draft Signature File
All Internet-Draft file names begin with "draft-". The next portion
of the file name depends on the source of the document. For example,
documents from IETF working groups usually have "ietf-" followed by
the working group abbreviation, and this is followed by a string that
helps people figure out the subject of the document.
All Internet-Draft file names end with a hyphen followed by a two-
digit version number and a suffix. The suffix indicates the type of
file. A plain text file with a suffix of ".txt" is required. Other
formats may also be provided, and they employ the appropriate suffix
for the file format.
The companion signature file has exactly the same file name as the
Internet-Draft, except that ".p7s" is added to the end. This file
name suffix conforms to the conventions in [MSG]. Here are a few
example names:
Internet-Draft: draft-ietf-example-widgets-03.txt
Signature File: draft-ietf-example-widgets-03.txt.p7s
Internet-Draft: draft-ietf-example-widgets-03.ps
Signature File: draft-ietf-example-widgets-03.ps.p7s
Internet-Draft: draft-housley-internet-draft-sig-file-00.txt
Signature File: draft-housley-internet-draft-sig-file-00.txt.p7s
The IETF Secretariat will post the signature file in the repository
shortly after the Internet-Draft is posted.
2.1. Need for Canonicalization
In general, the content of the Internet-Draft is treated like a
single octet string for the generation of the digital signature.
Unfortunately, the plain text file requires canonicalization to avoid
signature validation problems. The primary concern is the manner in
which different operating systems indicate the end of a line of text.
Some systems use a single new-line character, other systems use the
combination of the carriage-return character followed by a line-feed
character, and other systems use fixed-length records padded with
space characters. For the digital signature to validate properly, a
single convention must be employed.
Housley Informational [Page 3]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
2.2. Text File Canonicalization
The canonicalization procedure follows the conventions used for text
files in the File Transfer Protocol (FTP) [FTP]. Such files must be
supported by FTP implementations, so code reuse seems likely.
The canonicalization procedure converts the data from its internal
character representation to the standard 8-bit NVT-ASCII
representation (see TELNET [TELNET]). In accordance with the NVT
standard, the <CRLF> sequence MUST be used to denote the end of a
line of text. Using the standard NVT-ASCII representation means that
data MUST be interpreted as 8-bit bytes.
Trailing space characters MUST NOT appear on a line of text. That
is, the space character must not be followed by the <CRLF> sequence.
Thus, a blank line is represented solely by the <CRLF> sequence.
The form-feed nonprintable character (0x0C) is expected in Internet-
Drafts. Other nonprintable characters, such as tab and backspace,
are not expected, but they do occur. For robustness, any
nonprintable or non-ASCII characters (ones outside the range 0x20 to
0x7E) MUST NOT be changed in any way not covered by the rules for
end-of-line handling in the previous paragraph.
Trailing blank lines MUST NOT appear at the end of the file. That
is, the file must not end with multiple consecutive <CRLF> sequences.
Any end-of-file marker used by an operating system is not considered
to be part of the file content. When present, such end-of-file
markers MUST NOT be processed by the digital signature algorithm.
Note: This text file canonicalization procedure is consistent with
the ASCII NVT definition offered in Appendix B of RFC 5198 [UFNI].
2.3. XML File Canonicalization
In accordance with the guidance of the World Wide Web Consortium
(W3C) in Section 2.11 of [R20060816], a <LF> character MUST be used
to denote the end of a line of text within an XML file. Any two-
character <CRLF> sequence and any <CR> that is not followed by <LF>
are to be translated to a single <LF> character.
2.4. Canonicalization of Other File Formats
No canonicalization is needed for file formats currently used for
Internet-Drafts other than plain text files and XML files. Other
file formats are treated as a simple sequence of octets by the
digital signature algorithm.
Housley Informational [Page 4]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
3. CMS Profile
CMS is used to construct the detached signature of the Internet-
Draft. The CMS ContentInfo content type MUST always be present, and
it MUST encapsulate the CMS SignedData content type. Since a
detached signature is being created, the CMS SignedData content type
MUST NOT encapsulate the Internet-Draft. The CMS detached signature
is summarized by:
ContentInfo {
contentType id-signedData, -- (1.2.840.113549.1.7.2)
content SignedData
}
SignedData {
version CMSVersion, -- Always set to 3
digestAlgorithms DigestAlgorithmIdentifiers,
encapContentInfo EncapsulatedContentInfo,
certificates CertificateSet, -- Secretariat certificate(s)
crls CertificateRevocationLists, -- Optional
signerInfos SET OF SignerInfo -- Only one signer
}
SignerInfo {
version CMSVersion, -- Always set to 3
sid SignerIdentifier,
digestAlgorithm DigestAlgorithmIdentifier,
signedAttrs SignedAttributes, -- Always present
signatureAlgorithm SignatureAlgorithmIdentifier,
signature SignatureValue,
unsignedAttrs UnsignedAttributes -- Optional
}
EncapsulatedContentInfo {
eContentType id-ct-asciiTextWithCRLF,
-- (1.2.840.113549.1.9.16.1.27)
eContent OCTET STRING -- Always absent
}
Housley Informational [Page 5]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
3.1. ContentInfo
The CMS requires the outer-most encapsulation to be ContentInfo
[CMS]. The fields of ContentInfo are used as follows:
contentType
indicates the type of the associated content. For the detached
Internet-Draft signature file, the encapsulated type is always
SignedData, so the id-signedData (1.2.840.113549.1.7.2) object
identifier MUST be present in this field.
content
holds the content. For the detached Internet-Draft signature
file, the content is always a SignedData content.
3.2. SignedData
The SignedData content type [CMS] contains the signature of the
Internet-Draft and information to aid in the validation of that
signature. The fields of SignedData are used as follows:
version
is the syntax version number. For this specification, the
version number MUST be set to 3.
digestAlgorithms
is a collection of one-way hash function identifiers. It MUST
contain the identifier used by the IETF Secretariat to generate
the digital signature. See the discussion of digestAlgorithm
in Section 3.2.1.
encapContentInfo
is the signed content, including a content type identifier.
Since a detached signature is being created, it does not
encapsulate the Internet-Draft. The use of the
EncapsulatedContentInfo type is discussed further in Section
3.2.2.
certificates
is an optional collection of certificates. It SHOULD include
the X.509 certificate needed to validate the digital signature
value. Certification Authority (CA) certificates and end
entity certificates MUST conform to the certificate profile
specified in [PKIX1].
Housley Informational [Page 6]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
crls
is an optional collection of certificate revocation lists
(CRLs). It SHOULD NOT include any CRLs; however, any CRLs that
are present MUST conform to the CRL profile specified in
[PKIX1].
signerInfos
is a collection of per-signer information. For this
specification, each item in the collection must represent the
IETF Secretariat. More than one SignerInfo MAY appear to
facilitate transitions between keys or algorithms. The use of
the SignerInfo type is discussed further in Section 3.2.1.
3.2.1. SignerInfo
The IETF Secretariat is represented in the SignerInfo type. The
fields of SignerInfo are used as follows:
version
is the syntax version number. In this specification, the
version MUST be set to 3.
sid
identifies the IETF Secretariat's public key. In this
specification, the subjectKeyIdentifier alternative is always
used, which identifies the public key directly. This
identifier MUST match the value included in the
subjectKeyIdentifier certificate extension in the IETF
Secretariat's X.509 certificate.
digestAlgorithm
identifies the one-way hash function, and any associated
parameters, used by the IETF Secretariat to generate the
digital signature.
signedAttrs
is an optional set of attributes that are signed along with the
content. The signedAttrs are optional in the CMS, but
signedAttrs is required by this specification. The SET OF
Attribute must be encoded with the distinguished encoding rules
(DER) [X.690]. Section 3.2.3 of this document lists the signed
attributes that MUST be included in the collection. Other
signed attributes MAY also be included.
signatureAlgorithm
identifies the digital signature algorithm, and any associated
parameters, used by the IETF Secretariat to generate the
digital signature.
Housley Informational [Page 7]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
signature
is the digital signature value generated by the IETF
Secretariat.
unsignedAttrs
is an optional set of attributes that are not signed. Unsigned
attributes are usually omitted; however, the unsigned
attributes MAY hold a trusted timestamp generated in accordance
with [TSP]. Appendix A of [TSP] provides more information
about this unsigned attribute.
3.2.2. EncapsulatedContentInfo
The EncapsulatedContentInfo structure contains a content type
identifier. Since a detached signature is being created, it does not
encapsulate the Internet-Draft. The fields of
EncapsulatedContentInfo are used as follows:
eContentType
is an object identifier that uniquely specifies the content
type. The content type associated with the plain text file
MUST be id-ct-asciiTextWithCRLF. Other file formats may also
be posted, and the appropriate content type for each format is
discussed in Section 4. Additional file formats can be added
if the Internet community chooses.
eContent
is optional. When an encapsulated signature is generated, the
content to be signed is carried in this field. Since a
detached signature is being created, eContent MUST be absent.
3.2.3. Signed Attributes
The IETF Secretariat MUST digitally sign a collection of attributes
along with the Internet-Draft. Each attribute in the collection MUST
be DER-encoded. The syntax for attributes is defined in [X.501], and
the X.500 Directory provides a rich attribute syntax. A very simple
subset of this syntax is used extensively in [CMS], where
ATTRIBUTE.&Type and ATTRIBUTE.&id are the only parts of the ATTRIBUTE
class that are employed.
Each of the attributes used with this CMS profile has a single
attribute value. Even though the syntax is defined as a SET OF
AttributeValue, there MUST be exactly one instance of AttributeValue
present.
Housley Informational [Page 8]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
The SignedAttributes syntax within signerInfo is defined as a SET OF
Attribute. The SignedAttributes MUST include only one instance of
any particular attribute.
The IETF Secretariat MUST include the content-type, message-digest,
and signing-time attributes. The IETF Secretariat MAY also include
the binary-signing-time signed attribute as well as any other
attribute that is deemed appropriate. The intent is to allow
additional signed attributes to be included if a future need is
identified. This does not cause an interoperability concern because
unrecognized signed attributes are ignored at verification.
3.2.3.1. Content-Type Attribute
A content-type attribute is required to contain the same object
identifier as the content type contained in the
EncapsulatedContentInfo. The appropriate content type for each
format is discussed in Section 4. The IETF Secretariat MUST include
a content-type attribute containing the appropriate content type.
Section 11.1 of [CMS] defines the content-type attribute.
3.2.3.2. Message-Digest Attribute
The IETF Secretariat MUST include a message-digest attribute, having
as its value the output of a one-way hash function computed on the
Internet-Draft that is being signed. Section 11.2 of [CMS] defines
the message-digest attribute.
3.2.3.3. Signing-Time Attribute
The IETF Secretariat MUST include a signing-time attribute,
specifying the time, based on the local system clock, at which the
digital signature was applied to the Internet-Draft. Since the IETF
Secretariat may choose to perform signatures in batches, the signing-
time may be several hours or days after the time that the Internet-
Draft was actually posted. Section 11.3 of [CMS] defines the
content-type attribute.
3.2.3.4. Binary-Signing-Time Attribute
The IETF Secretariat MAY include a binary-signing-time attribute,
specifying the time at which the digital signature was applied to the
Internet-Draft. If present, the time that is represented MUST match
the time represented in the signing-time attribute. The binary-
signing-time attribute is defined in [BinTime].
Housley Informational [Page 9]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
3.2.4. Unsigned Attributes
Unsigned attributes are usually omitted. However, an unsigned
attribute MAY hold a trusted timestamp generated in accordance with
[TSP]. The idea is to timestamp the IETF Secretariat digital
signature to prove that it was created before a given time. If the
IETF Secretariat's certificate is revoked the timestamp allows a
verifier to know whether the signature was created before or after
the revocation date. Appendix A of [TSP] defines the signature time-
stamp attribute that can be used to timestamp a digital signature.
4. Content Types
This section lists the content types that are used in this
specification. The eContentType field as described in Section 3.2.2
contains a content type identifier, and the same value appears in the
content-type attribute as described in Section 3.2.3.1.
The following table lists the file formats and the associated content
type.
File Format Content Type
----------- ------------
Plain text id-ct-asciiTextWithCRLF
Extensible Markup Language (XML) id-ct-xml
Portable Document Format (PDF) id-ct-pdf
PostScript id-ct-postscript
The object identifiers associated with the content types listed in
the above table are:
id-ct OBJECT IDENTIFIER ::= { iso(1) member-body(2)
us(840) rsadsi(113549) pkcs(1) pkcs9(9) smime(16) 1 }
id-ct-asciiTextWithCRLF OBJECT IDENTIFIER ::= { id-ct 27 }
id-ct-xml OBJECT IDENTIFIER ::= { id-ct 28 }
id-ct-pdf OBJECT IDENTIFIER ::= { id-ct 29 }
id-ct-postscript OBJECT IDENTIFIER ::= { id-ct 30 }
5. Security Considerations
The IETF Secretariat MUST protect its private key. The use of a
hardware security module (HSM) is strongly RECOMMENDED because
compromise of the IETF Secretariat's private key permits masquerade.
Housley Informational [Page 10]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
The IETF Secretariat currently maintains servers at a primary
location and a backup location. This configuration requires two
HSMs, one at each location. However, the two HSMs do not need to use
the same signing key. Each HSM can have a different signing key, as
long as each one has their own certificate.
The generation of a public/private key pair for signature operations
relies on random number generation. The use of an inadequate pseudo-
random number generator (PRNG) can result in little or no security.
An attacker may find it much easier to reproduce the PRNG environment
that produced the key pair, searching the resulting small set of
possibilities, than to brute-force search the whole private key
space. The generation of quality random numbers is difficult, but
[RANDOM] offers important guidance in this area.
The IETF Secretariat should be aware that cryptographic algorithms
become weaker with time. As new cryptanalysis techniques are
developed and computing performance improves, the work factor to
break a particular digital signature algorithm or one-way hash
function will be reduced. Therefore, it SHOULD be possible to
migrate these algorithms. That is, the IETF Secretariat SHOULD be
prepared for the supported algorithms to change over time.
The IETF Secretariat must take care to use the correct time in
signing-time and binary-signing-time attributes. The inclusion of a
date within the Internet-Draft by the authors that is shortly before
the signing time attributes supplied by the IETF Secretariat provides
confidence about the date that the Internet-Draft was posted to the
repository. However, the IETF Secretariat may choose to perform
signatures in batches, and the signing-time may be several hours or
days after the time that the Internet-Draft was actually posted.
As stated above, the IETF Secretariat may choose to sign Internet-
Drafts in batches. This allows a single HSM to be used if multiple
servers are located in one geographic location, and it allows the HSM
to be off-line except when signatures are being generated. Further,
this allows the IETF Secretariat to include manual steps, such as
entering an HSM passphrase or inserting a smartcard, as part of the
signing procedure to improve operations security.
6. Deployment and Operational Considerations
The private key used to generate the IETF Secretariat signature ought
to be stored in an HSM to provide protection from unauthorized
disclosure. While the HSM will be operated by the IETF Secretariat,
it ought to be owned by the IETF Trust. Accordingly, the Trustees of
the IETF Trust will designate an appropriate certification authority
Housley Informational [Page 11]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
to issue a certificate to the IETF Secretariat, and they will approve
any procedures used by the IETF Secretariat for signing documents
consistent with this specification.
7. Design Rationale
A detached signature is used for all file formats. Some file
formats, such as PDF and XML, have file-format-specific ways of
handling digital signatures. These file-format-specific approaches
are not used for two reasons. First, a single way to sign Internet-
Drafts will ease implementation by the IETF Secretariat. Second, if
the author includes a signature using one of these file-format-
specific approaches, the IETF Secretariat signature does not harm it
in any way.
File names are the means linking the detached signature to the signed
document. A CMS signed attribute could have been specified to
include another form of linkage, and this could be added in the
future. At this point in time, it is important to support signature
validation of expired Internet-Drafts that are obtained from non-IETF
repositories. Therefore, the appropriate value for such a signed
attribute is unclear. This specification allows an Internet-Draft
and companion signature file to be stored anywhere without hindering
signature validation.
8. Acknowledgments
The idea for the Internet-Draft signature file came from a discussion
with Scott Bradner at IETF 69 in Chicago. Many helpful suggestions
came from Jim Schaad, Pasi Eronen, and Chris Newman.
9. References
9.1. Normative References
[CMS] Housley, R., "Cryptographic Message Syntax (CMS)", RFC
3852, July 2004.
[PKIX1] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, "Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation
List (CRL) Profile", RFC 5280, May 2008.
[STDWORDS] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
Housley Informational [Page 12]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
[X.680] ITU-T Recommendation X.680: ISO/IEC 8824-1:2002,
Information technology - Abstract Syntax Notation One
(ASN.1): Specification of basic notation, 2002.
[X.690] ITU-T Recommendation X.690: ISO/IEC 8825-1:2002,
Information technology - ASN.1 encoding rules:
Specification of Basic Encoding Rules (BER), Canonical
Encoding Rules (CER) and Distinguished Encoding Rules
(DER), 2002.
9.2. Informative References
[BinTime] Housley, R., "BinaryTime: An Alternate Format for
Representing Date and Time in ASN.1", RFC 4049, April
2005.
[FTP] Postel, J. and J. Reynolds, "File Transfer Protocol", STD
9, RFC 959, October 1985.
[MSG] Ramsdell, B., Ed., "Secure/Multipurpose Internet Mail
Extensions (S/MIME) Version 3.1 Message Specification",
RFC 3851, July 2004.
[OpenSSL] "OpenSSL: The Open Source toolkit for SSL/TLS",
http://www.openssl.org/.
[R20060816] Bray, T., J. Paoli, C. M. Sperberg-McQueen, E. Maler, and
F. Yergeau, "Extensible Markup Language (XML) 1.0 (Fourth
Edition)", W3C Recommendation, 16 August 2006,
http://www.w3.org/TR/2006/REC-xml-20060816/.
[RANDOM] Eastlake, D., 3rd, Schiller, J., and S. Crocker,
"Randomness Requirements for Security", BCP 106, RFC
4086, June 2005.
[TELNET] Postel, J. and J. Reynolds, "Telnet Protocol
Specification", STD 8, RFC 854, May 1983.
[TSP] Adams, C., Cain, P., Pinkas, D., and R. Zuccherato,
"Internet X.509 Public Key Infrastructure Time-Stamp
Protocol (TSP)", RFC 3161, August 2001.
[UFNI] Klensin, J. and M. Padlipsky, "Unicode Format for Network
Interchange", RFC 5198, March 2008.
[X.501] ITU-T Recommendation X.501: Information Technology - Open
Systems Interconnection - The Directory: Models, 1993.
Housley Informational [Page 13]
RFC 5485 Digital Signatures on Internet-Drafts March 2009
Appendix: A
OpenSSL 0.9.9 [OpenSSL] includes an implementation of CMS. The
following command line can be used to verify an Internet-Draft
signature:
openssl cms -verify -CAfile <cert-file> -content <internet-draft> /
-inform DER -in <p7s-file> -out /dev/null
The arguments need to be provided as follows:
<cert-file>
the name of the file containing the trust anchor, which is
typically the self-signed certificate of the certification
authority that issued a certificate to the IETF Secretariat.
<internet-draft>
the name of the file containing the Internet-Draft after
canonicalization.
<p7s-file>
the name of the file containing the detached signature that was
generated in accordance with this specification.
Author's Address
Russell Housley
Vigil Security, LLC
918 Spring Knoll Drive
Herndon, VA 20170
USA
EMail: housley@vigilsec.com
Housley Informational [Page 14]