Network Working Group                                       M. Wildgrube
Request for Comments: 3072                                    March 2001
Category: Informational


                 Structured Data Exchange Format (SDXF)

Status of this Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2001).  All Rights Reserved.

IESG Note

   This document specifies a data exchange format and, partially, an API
   that can be used for creating and parsing such a format.  The IESG
   notes that the same problem space can be addressed using formats that
   the IETF normally uses including ASN.1 and XML.  The document reader
   is strongly encouraged to carefully read section 13 before choosing
   SDXF over ASN.1 or XML.  Further, when storing text in SDXF, the user
   is encourage to use the datatype for UTF-8, specified in section 2.5.

Abstract

   This specification describes an all-purpose interchange format for
   use as a file format or for net-working.  Data is organized in chunks
   which can be ordered in hierarchical structures.  This format is
   self-describing and CPU-independent.

Table of Contents

   1.  Introduction ................................................. 2
   2.  Description of the SDXF data format .......................... 3
   3.  Introduction to the SDXF functions ........................... 5
   3.1 General remarks .............................................. 5
   3.2 Writing a SDXF buffer ........................................ 5
   3.3 Reading a SDXF buffer ........................................ 6
   3.4 Example ...................................................... 6
   4.  Platform independence ........................................ 8
   5.  Compression .................................................. 9
   6.  Encryption ...................................................11
   7.  Arrays........................................................11
   8.  Description of the SDXF functions ............................12



Wildgrube                    Informational                      [Page 1]


RFC 3072            Structured Data Exchange Format           March 2001


   8.1 Introduction .................................................12
   8.2 Basic definitions ............................................13
   8.3 Definitions for C++ ..........................................15
   8.4 Common Definitions ...........................................16
   8.5 Special functions ............................................17
   9.  'Support' of UTF-8 ...........................................19
   10.  Security Considerations .....................................19
   11.  Some general hints ..........................................20
   12.  IANA Considerations .........................................20
   13.  Discussion ..................................................21
   13.1 SDXF vs. ASN.1 ..............................................21
   13.2 SDXF vs. XML ................................................22
   14.  Author's Address ............................................24
   15.  Acknowledgements ............................................24
   16.  References ..................................................24
   17.  Full Copyright Statement ....................................26

1. Introduction

   The purpose of the Structured Data eXchange Format (SDXF) is to
   permit the interchange of an arbitrary structured data block with
   different kinds of data (numerical, text, bitstrings).  Because data
   is normalized to an abstract computer architecture independent
   "network format", SDXF is usable as a network interchange data
   format.

   This data format is not limited to any application, the demand for
   this format is that it is usable as a text format for word-
   processing, as a picture format, a sound format, for remote procedure
   calls with complex parameters, suitable for document formats, for
   interchanging business data, etc.

   SDXF is self-describing, every program can unpack every SDXF-data
   without knowing the meaning of the individual data elements.

   Together with the description of the data format a set of functions
   will be introduced.  With the help of these functions one can create
   and access the data elements of SDXF.  The idea is that a programmer
   should only use these functions instead of maintaining the structure
   by himself on the level of bits and bytes.  (In the speech of
   object-oriented programming these functions are methods of an object
   which works as a handle for a given SDXF data block.)

   SDXF is not limited to a specific platform, along with a correct
   preparation of the SDXF functions the SDXF data can be interchanged
   (via network or data carrier) across the boundaries of different
   architectures (specified by the character code like ASCII, ANSI or
   EBCDIC and the byte order for binary data).



Wildgrube                    Informational                      [Page 2]


RFC 3072            Structured Data Exchange Format           March 2001


   SDXF is also prepared to compress and encrypt parts or the whole
   block of SDXF data.

2. Description of SDXF data format.

2.1 First we introduce the term "chunk".  A chunk is a data structure
    with a fixed set of components.  A chunk may be "elementary" or
    "structured".  The latter one contains itself one or more other
    chunks.

   A chunk consists of a header and the data body (content):

   +----------+-----+-------+-----------------------------------+
   | Name     | Pos.| Length| Description                       |
   +----------+-----+-------+-----------------------------------+
   | chunk-ID |  1  |   2   | ID of the chunk (unsigned short)  |
   | flags    |  3  |   1   | type and properties of this chunk |
   | length   |  4  |   3   | length  of the following data     |
   | content  |  7  |   *)  | net data or a list of of chunks   |
   +----------+-----+-------+-----------------------------------+

   (* as stated in "length". total length of chunk is length+6.  The
   chunk ID is a non-zero positive number.

   or more visually:

   +----+----+----+----+----+----+----+----+----+-...
   | chunkID | fl | length       |  content
   +----+----+----+----+----+----+----+----+----+-...

   or in ASN.1 syntax:

   chunk  ::=  SEQUENCE
   {
     chunkID INTEGER (1..65535),
     flags   BIT STRING,
     length  OCTET STRING SIZE 3, -- or: INTEGER (0..16777215)
     content OCTET STRING
   }

2.2 Structured chunk.

   A structured chunk is marked as such by the flag byte (see 2.5).
   Opposed to an elementary chunk its content consists of a list of
   chunks (elementary or structured):






Wildgrube                    Informational                      [Page 3]


RFC 3072            Structured Data Exchange Format           March 2001


   +----+-+---+-------+-------+-------+-----+-------+
   | id |f|len| chunk | chunk | chunk | ... | chunk |
   +----+-+---+-------+-------+-------+-----+-------+

   With the help of this concept you can reproduce every hierarchically
   structured data into a SDXF chunk.

2.3 Some Remarks about the internal representation of the chunk's
    elements:

   Binary values are always in high-order-first (big endian) format,
   like the binary values in the IP header (network format).  A length
   of 300 (=256 + 32 + 12) is stored as

   +----+----+----+----+----+----+----+----+----+--
   |         |    | 00   01   2C |  content
   +----+----+----+----+----+----+----+----+----+--

   in hexadecimal notation.

   This is also valid for the chunk-ID.

2.4 Character values in the content portion are also an object of
    adaptation: see chapter 4.

2.5 Meaning of the flag-bits: Let us represent the flag byte in this
    manner:

     +-+-+-+-+-+-+-+-+
     |0|1|2|3|4|5|6|7|
     +-+-+-+-+-+-+-+-+
      | | | | | | | |
      | | | | | | | +-- reserved
      | | | | | | +---- array
      | | | | | +------ short chunk
      | | | | +-------- encrypted chunk
      | | | +---------- compressed chunk
      | | |
      +-+-+------------ data type (0..7)

   data types are:

   0 -- pending structure (chunk is inconsistent, see also 11.1)
   1 -- structure
   2 -- bit string
   3 -- numeric
   4 -- character
   5 -- float (ANSI/IEEE 754-1985)



Wildgrube                    Informational                      [Page 4]


RFC 3072            Structured Data Exchange Format           March 2001


   6 -- UTF-8
   7 -- reserved

2.6 A short chunk has no data body.  The 3 byte Length field is used as
   data bytes instead.  This is used in order to save space when there
   are many small chunks.

2.7 Compressed and encrypted chunks are explained in chapter 5 and 6.

2.8 Arrays are explained in chapter 7.

2.9 Handling of UTF-8 is explained in chapter 9.

2.10 Not all combinations of bits are allowed or reasonable:

   -  the flags 'array' and 'short' are mutually exclusive.
   -  'short' is not applicable for data type 'structure' and 'float'.
   -  'array' is not applicable for data type 'structure'.

3. Introduction to the SDXF functions

3.1 General remarks

   The functionality of the SDXF concept is not bounded to any
   programming language, but of course the functions themselves must be
   coded in a particular language.  I discuss these functions in C and
   C++, because in the meanwhile these languages are available on almost
   all platforms.

   All these functions for reading and writing SDXF chunks uses only one
   parameter, a parameter structure.  In C++ this parameter structure is
   part of the "SDXF class" and the SDXF functions are methods of this
   class.

   An exact description of the interface is given in chapter 8.

3.2 Writing a SDXF buffer

   For to write SDXF chunks, there are following functions:

   init    -- initialize the parameter structure
   create  -- create a new chunk
   leave   -- "close" a structured chunk








Wildgrube                    Informational                      [Page 5]


RFC 3072            Structured Data Exchange Format           March 2001


3.3 Reading a SDXF buffer

   For to read SDXF chunks, there are following functions:

   init    -- initialize the parameter structure
   enter   -- "go into" a structured chunk
   next    -- "go to" the next chunk inside a structured chunk
   extract -- extract the content of an elementary chunk into
              user's data area
   leave   -- "go out" off a structured chunk

3.4 Example:

3.4.1 Writing:

   For demonstration we use a reduced (outlined) C++ Form of these
   functions with polymorph definitions:

   void create (short chunkID); // opens a new structure,
   void create (short chunkID, char *string);
        // creates a new chunk with dataType character, etc.)

   The sequence:

   SDXF x(new); // create the SDXF object "x" for a new chunk
                // includes the "init"
   x.create (3301);   // opens a new structure
   x.create (3302, "first chunk");
   x.create (3303, "second chunk");
   x.create (3304);   // opens a new structure
   x.create (3305, "chunk in a structure");
   x.create (3306, "next chunk in a structure");
   x.leave ();        // closes the inner structure
   x.create (3307, "third chunk");
   x.leave ();        // closes the outer structure
















Wildgrube                    Informational                      [Page 6]


RFC 3072            Structured Data Exchange Format           March 2001


   creates a chunk which we can show graphically like:

   3301
    |
    +--- 3302 = "first chunk"
    |
    +--- 3303 = "second chunk"
    |
    +--- 3304
    |      |
    |      +--- 3305 = "chunk in a structure"
    |      |
    |      +--- 3306 = "next chunk in a structure"
    |
    +--- 3307 = "last chunk"

3.4.2 Reading

   A typically access to a structured SDXF chunk is a selection inside
   a loop:

   SDXF x(old); // defines a SDXF object "x" for an old chunk
   x.enter ();  // enters the structure

   while (x.rc == 0) // 0 == ok, rc will set by the SDXF functions
   {
     switch (x.chunkID)
     {
       case 3302:
         x.extract (data1, maxLength1);
                   // extr. 1st chunk into data1
         break;

       case 3303:
         x.extract (data2, maxLength2);
                   // extr. 2nd chunk into data2
         break;

       case 3304:  // we know this is a structure
         x.enter (); // enters the inner structure

         while (x.rc == 0) // inner loop
         {
           switch (x.chunkID)
           {
             case 3305:
               x.extract (data3, maxLength3);
                         // extr. the chunk inside struct.



Wildgrube                    Informational                      [Page 7]


RFC 3072            Structured Data Exchange Format           March 2001


               break;
             case 3306:
               x.extract (data4, maxLength4);
                         // extr. 2nd chunk inside struct.
               break;
           }
           x.next (); // returns x.rc == 1 at end of structure
         } // end-while
         break;

       case 3307:
         x.extract (data5, maxLength5);
                   // extract last chunk into data
         break;
       // default: none - ignore unknown chunks !!!

     } // end-switch
     x.next (); // returns x.rc = 1 at end of structure
   } // end-while

4. Platform independence

   The very most of the computer platforms today have a 8-Bits-in-a-Byte
   architecture, which enables data exchange between these platforms.
   But there are two significant points in which platforms may be
   different:

   a) The representation of binary numerical (the short and long int and
      floats).

   b) The representation of characters (ASCII/ANSI vs. EBCDIC)

   Point (a) is the phenomenon of "byte swapping": How is a short int
   value 259 = 0x0103 = X'0103' be stored at address 4402?

   The two flavours are:

   4402 4403
   01   03    the big-endian, and
   03   01    the little-endian.

   Point (b) is represented by a table of the assignment of the 256
   possible values of a Byte to printable or control characters.  (In
   ASCII the letter "A" is assigned to value (or position) 0x41 = 65, in
   EBCDIC it is 0xC1 = 193.)






Wildgrube                    Informational                      [Page 8]


RFC 3072            Structured Data Exchange Format           March 2001


   The solution of these problems is to normalize the data:

   We fix:

   (a) The internal representation of binary numerals are 2-complements
       in big-endian order.

   (b) The internal representation of characters is ISO 8859-1 (also
       known as Latin 1).

   The fixing of point (b) should be regarded as a first strike.  In
   some environment 8859-1 seems not to be the best choice, in a greek
   or russian environment 8859-5 or 8859-7 are appropriate.

   Nevertheless, in a specific group (or world) of applications, that is
   to say all the applications which wants to interchange data with a
   defined protocol (via networking or diskette or something else), this
   internal character table must be unique.

   So a possibility to define a translation table (and his inversion)
   should be given.

   Important: You construct a SDXF chunk not for a specific addressee,
   but you adapt your data into a normalized format (or network format).

   This adaption is not done by the programmer, it will be done by the
   create and extract function.  An administrator has take care of
   defining the correct translation tables.

5. Compression

   As stated in 2.5 there is a flag bit which declares that the
   following data (elementary or structured) are compressed.  This data
   is not further interpretable until it is decompressed.  Compression
   is transparently done by the SDXF functions: "create" does the
   compression for elementary chunks, "leave" for structured chunks,
   "extract" does the decompression for elementary chunks, "enter" for
   structured chunks.

   Transparently means that the programmer has only to tell the SDXF
   functions that he want compress the following chunk(s).

   For choosing between different compression methods and for
   controlling the decompressed (original) length, there is an
   additional definition:






Wildgrube                    Informational                      [Page 9]


RFC 3072            Structured Data Exchange Format           March 2001


   After the chunk header for a compressed chunk, a compression header
   is following:

   +-----------------------+---------------+---------------->
   |      chunk header     | compr. header | compressed data
   +---+---+---+---+---+---+---+---+---+---+---------------->
   |chunkID|flg|   length  |md | orglength |
   +---+---+---+---+---+---+---+---+---+---+---------------->

   -  'orglength' is the original (decompressed) length of the data.

   -  'md' is the "compression method": Two methods are described here:

      #  method 01 for a simple (fast but not very effective)
         "Run Length 1" or "Byte Run 1" algorithm.  (More then two
         consecutive identical characters are replaced by the number of
         these characters and the character itself.)

         more precisely:

         The compressed data consists of several sections of various
         length.  Every section starts with a "counter" byte, a signed
         "tiny" (8 bit) integer, which contains a length information.

         If this byte contains the value "n",
         with n >= 0 (and n <128), the next n+1 bytes will be taken
         unchanged;
         with n < 0 (and n > -128), the next byte will be replicated
         -n+1 times;
         n = -128 will be ignored.

         Appending blanks will be cutted in general.  If these are
         necessary, they can be reconstructed while "extract"ing with
         the parameter field "filler" (see 8.2.1) set to space
         character.

      #  method 02 for the wonderful "deflate" algorithm which comes
         from the "zip"-people.
         The authors are:
         Jean-loup Gailly (deflate routine),
         Mark Adler (inflate routine), and others.

         The deflate format is described in [DEFLATE].

      The values for the compression method number are maintained by
      IANA, see chap. 12.1.





Wildgrube                    Informational                     [Page 10]


RFC 3072            Structured Data Exchange Format           March 2001


6. Encryption

   As stated in 2.5 there is a flag bit which declares that the
   following data (elementary or structured) is encrypted.  This data is
   not interpretable until it is decrypted.  En/Decryption is
   transparently done by the SDXF functions, "create" does the
   encryption for elementary chunks, "leave" for structured chunks,
   "extract" does the decryption for elementary chunks, "enter" for
   structured chunks.  (Yes it sounds very similar to chapter 5.)  More
   then one encryption method for a given range of applications is not
   very reasonable. Some encryption algorithms work with block ciphering
   algorithms. That means that the length of the data to encrypt must be
   rounded up to the next multiple of this block length. This blocksize
   (zero means non-blocking) is reported by the encryption interface
   routine (addressed by the option field *encryptProc, see chapter 8.5)
   with mode=3. If blocking is used, at least one byte is added, the
   last byte of the lengthening data contains the number of added bytes
   minus one. With this the decryption interface routine can calculate
   the real data length.

   If an application (or network connect handshaking protocol) needs to
   negotiate an encryption method it should be used a method number
   maintained by IANA, see chap. 12.2.

   Even the en/decryption is done transparently, an encryption key
   (password) must be given to the SDXF functions.  Encryption is done
   after translating character data into, decryption is done before
   translation from the internal ("network-") format.

   If both, encryption and compression are applied on the same chunk,
   compression is done first - compression on good encrypted data (same
   strings appears as different after encryption) tends to zero
   compression rates.

7. Arrays

   An array is a sequence of chunks with identical chunk-ID, length and
   data type.

   At first a hint: in principle a special definition in SDXF for such
   an array is not really necessary:

   It is not forbidden that there are more than one chunk with equal
   chunk-ID within the same structured chunk.

   Therefore with a sequence of SDX_next / SDX_extract calls one can
   fill the destination array step by step.




Wildgrube                    Informational                     [Page 11]


RFC 3072            Structured Data Exchange Format           March 2001


   If there are many occurrences of chunks with the same chunk-ID (and a
   comparative small length), the overhead of the chunk-packages may be
   significant.

   Therefore the array flag is introduced.  An array chunk has only one
   chunk header for the complete sequence of elementary chunks.  After
   the chunk header for an array chunk, an array header is following:

   This is a short integer (big endian!) which contains the number of
   the array elements (CT).  Every element has a fixed length (EL), so
   the chunklength (CL) is CL = EL * CT + 2.

   The data elements follows immediately after the array header.

   The complete array will be constructed by SDX_create, the complete
   array will be read by SDX_extract.

   The parameter fields (see 8.2.1) 'dataLength' and 'count' are used
   for the SDXF functions 'extract' and 'create':

   Field 'dataLength' is the common length of the array elements,
   'count' is the actual dimension of the array for 'create' (input).

   For the 'extract' function 'count' acts both as an input and output
   parameter:

   Input : the maximum dimension
   output: the actual array dimension.

   (If output count is greater than input count, the 'data cutted'
   warning will be responded and the destination array is filled up to
   the maximum dimension.)

8. Description of the SDXF functions

8.1 Introduction

   Following the principles of Object Oriented Programming, not only the
   description of the data is necessary, but also the functions which
   manipulate data - the "methods".

   For the programmer knowing the methods is more important than knowing
   the data structure, the methods has to know the exact specifications
   of the data and guarantees the consistence of the data while creating
   them.






Wildgrube                    Informational                     [Page 12]


RFC 3072            Structured Data Exchange Format           March 2001


   A SDXF object is an instance of a parameter structure which acts as a
   programming interface.  Especially it points to an actual SDXF data
   chunk, and, while processing on this data, there is a pointer to the
   actual inner chunk which will be the focus for the next operation.

   The benefit of an exact interface description is the same as using
   for example the standard C library functions: By using standard
   interfaces your code remains platform independent.

8.2 Basic definitions

8.2.1 The SDXF Parameter structure

   All SDXF access functions need only one parameter, a pointer to the
   SDXF parameter structure:

   First 3 prerequisite definitions:

   typedef short int      ChunkID;
   typedef unsigned char  Byte;

   typedef struct Chunk
   {
     ChunkID    chunkID;
     Byte       flags;
     char       length [3];
     Byte       data;
   } Chunk;

   And now the parameter structure:

   typedef struct
   {
     ChunkID  chunkID;       // name (ID) of Chunk
     Byte    *container;     // pointer to the whole Chunk
     long     bufferSize;    // size of container
     Chunk   *currChunk;     // pointer to actual Chunk
     long     dataLength;    // length of data in Chunk
     long     maxLength;     // max. length of Chunk for SDX_extract
     long     remainingSize; // rem. size in cont. after SDX_create
     long     value;         // for data type numeric
     double   fvalue;        // for data type float
     char    *function;      // name of the executed SDXF function
     Byte    *data;          // pointer to Data
     Byte    *cryptkey;      // pointer to Crypt Key
     short    count;         // (max.) number of elements in an array
     short    dataType;      // Chunk data type / init open type
     short    ec;            // extended return-code



Wildgrube                    Informational                     [Page 13]


RFC 3072            Structured Data Exchange Format           March 2001


     short    rc;            // return-code
     short    level;         // level of hierarchy
     char     filler;        // filler char for SDX_extract
     Byte     encrypt;       // Indication if data to encrypt (0 / 1)
     Byte     compression;   // compression method
                             //   (00=none, 01=RL1, 02=zip/deflate)
   } SDX_obj, *SDX_handle;

   Only the "public" fields of the parameter structure which acts as
   input and output for the SDXF functions is described here.  A given
   implementation may add some "private" fields to this structure.

8.2.2 Basic Functions

   All these functions works with a SDX_handle as the only formal
   parameter.  Every function returns as output ec and rc as a report of
   success.  For the values for ec, rc and dataType see chap. 8.4.

    1. SDX_init : Initialize the parameter structure.

         input : container, dataType, bufferSize (for dataType =
                 SDX_NEW only)
         output: currChunk, dataLength (for dataType = SDX_OLD only),
                 ec, rc,
                 the other fields of the parameter structure will be
                 initialized.

    2. SDX_enter : Enter a structured chunk.
       You can access the first chunk inside this structured chunk.
         input : none
         output: currChunk, chunkID, dataLength, level, dataType,
                 ec, rc

    3. SDX_leave : Leave the actual entered structured chunk.
         input : none
         output: currChunk, chunkID, dataLength, level, dataType,
                 ec, rc

    4. SDX_next : Go to the next chunk inside a structured chunk.
         input : none
         output: currChunk, chunkID, dataLength, dataType, count, ec, rc

        At the end of a structured chunk SDX_next returns rc =
        SDX_RC_failed and ec = SDX_EC_eoc (end of chunk)
        The actual structured chunk is SDX_leave'd automatically.






Wildgrube                    Informational                     [Page 14]


RFC 3072            Structured Data Exchange Format           March 2001


    5. SDX_extract : Extract data of the actual chunk.
       (If actual chunk is structured, only a copy is done, elsewhere
       the data is converted to host format.)
       input / output depends on the dataType:

       if dataType is structured, binary or char:
         input : data, maxLength, count, filler
         output: dataLength, count, ec, rc

       if dataType is numeric (float resp.):
         input : none
         output: value (fvalue resp.), ec, rc

    6. SDX_select : Go to the (next) chunk with a given chunkID.
         input : chunkID
         output: currChunk, dataLength, dataType, ec, rc

    7. SDX_create : Creating a new chunk (at the end of the actual
       structured chunk).
         input : chunkID, dataLength, data, (f)value, dataType,
                 compression, encrypt, count
         update: remainingSize, level
         output: currChunk, dataLength, ec, rc

    8. SDX_append : Append a complete chunk at the end of the actual
       structured chunk).
         input : data, maxLength, currChunk
         update: remainingSize, level
         output: chunkID, chunkLength, maxLength, dataType, ec, rc

8.3 Definitions for C++

   This is the specification of the SDXF class in C++: (The type 'Byte'
   is defined as "unsigned char" for bitstrings, opposed to "signed
   char" for character strings)

   class C_SDXF
   {
     public:

     // constructors and destructor:
     C_SDXF  ();                          // dummy
     C_SDXF  (Byte *cont);                // old container
     C_SDXF  (Byte *cont, long size);     // new container
     C_SDXF  (long size);                 // new container
     ~C_SDXF ();
     // methods:




Wildgrube                    Informational                     [Page 15]


RFC 3072            Structured Data Exchange Format           March 2001


     void init  (void);                   // old container
     void init  (Byte *cont);             // old container
     void init  (Byte *cont, long size);  // new container
     void init  (long size);              // new container

     void enter   (void);
     void leave   (void);
     void next    (void);
     long extract (Byte *data, long length);    // chars, bits
     long extract (void);                       // numeric data
     void create  (ChunkID);                    // structured
     void create  (ChunkID, long value);        // numeric
     void create  (ChunkID, double fvalue);     // float
     void create  (ChunkID, Byte *data, long length);// binary
     void create  (ChunkID, char *data);             // chars
     void set_compression (Byte compression_method);
     void set_encryption  (Byte *encryption_key);

     // interface:

     ChunkID  id;        // see 8.4.1
     short    dataType;  // see 8.4.2
     long     length;    // length of data or chunk

     long     value;
     double   fvalue;
     short    rc;  // the raw return code       see 8.4.3
     short    ec;  // the extended return code  see 8.4.4

     protected:
     // implementation dependent ...

   };

8.4 Common Definitions:

8.4.1 Definition of ChunkID:

   typedef short ChunkID;

8.4.2 Values for dataType:

   SDX_DT_inconsistent     = 0
   SDX_DT_structured       = 1
   SDX_DT_binary           = 2
   SDX_DT_numeric          = 3
   SDX_DT_char             = 4
   SDX_DT_float            = 5



Wildgrube                    Informational                     [Page 16]


RFC 3072            Structured Data Exchange Format           March 2001


   SDX_DT_UTF8             = 6

    data types for SDX_init:
   SDX_OLD                 = 1
   SDX_NEW                 = 2

8.4.3 Values for rc:

   SDX_RC_ok               = 0
   SDX_RC_failed           = 1
   SDX_RC_warning          = 1
   SDX_RC_illegalOperation = 2
   SDX_RC_dataError        = 3
   SDX_RC_parameterError   = 4
   SDX_RC_programError     = 5
   SDX_RC_noMemory         = 6

8.4.4 Values for ec:

   SDX_EC_ok              =  0
   SDX_EC_eoc             =  1 // end of chunk
   SDX_EC_notFound        =  2
   SDX_EC_dataCutted      =  3
   SDX_EC_overflow        =  4
   SDX_EC_wrongInitType   =  5
   SDX_EC_comprerr        =  6 // compression error
   SDX_EC_forbidden       =  7
   SDX_EC_unknown         =  8
   SDX_EC_levelOvflw      =  9
   SDX_EC_paramMissing    = 10
   SDX_EC_magicError      = 11
   SDX_EC_not_consistent  = 12
   SDX_EC_wrongDataType   = 13
   SDX_EC_noMemory        = 14
   SDX_EC_error           = 99 // rc is sufficiently

8.5 Special functions

   Besides the basic definitions there is a global function
   (SDX_getOptions) which returns a pointer to a global table of
   options.

   With the help of these options you can adapt the behaviour of SDXF.
   Especially you can define an alternative pair of translation tables
   or an alternative function which reads these tables from an external
   resource (p.e. from disk).





Wildgrube                    Informational                     [Page 17]


RFC 3072            Structured Data Exchange Format           March 2001


   Within this table of options there is also a pointer to the function
   which is used for encryption / decryption: You can install your own
   encryption algorithm by setting this pointer.

   The options pointer is received by:

   SDX_TOptions *opt = SDX_getOptions ();

   With:

   typedef struct
   {
    Byte            *toHost;        // Trans tab net -> host
    Byte            *toNet;         // Trans tab host -> net
    int              maxlevel;      // highest possible level
    int              translation;   // translation net <-> host
                                    // is in effect=1 or not=0
    TEncryptProc    *encryptProc;   // alternate encryption routine
    TGetTablesProc  *getTablesProc; // alternate routine defining
                                    // translation Tables
    TcvtUTF8Proc    *convertUTF8;   // routine to convert to/from UTF-8
   }  SDX_TOptions;

   typedef long TencryptProc (
     int   mode,   // 1= to encrypt, 2= to decrypt, 3= encrypted length
     Byte *buffer, // data to en/decrypt
     long  len,    // len: length of buffer
     char *passw); // Password

    // returns length of en/de-crypted data
    // (parameter buffer and passw are ignored for mode=3)
    // returns blocksize for mode=3 and len=0.
    // blocksize is zero for non-blocking algorithms

   typedef int TGetTablesProc (Byte **toNet, Byte **toHost);
    // toNet, toHost: pointer to output params.  Both params
    // points to translation tables of 256 Bytes.
    // returns success: 1 = ok, 0 = error.

   typedef int TcvtUTF8Proc
   ( int   mode,     // 1 = to UTF-8, 2 = from UTF-8
     Byte *target, int *targetlength,  // output
     Byte *source, int sourcelength);  // input
   // targetlength contains maximal size as input param.
   // returns success: 1 = ok, 0 = no conversion






Wildgrube                    Informational                     [Page 18]


RFC 3072            Structured Data Exchange Format           March 2001


9. 'Support' of UTF-8.

   Many systems supports [UTF-8] as a character format for transferred
   data.  The benefit is that no fixing of a specific character set for
   an application is needed because the set of 'all' characters is used,
   represented by the 'Universal Character Set' UCS-2 [UCS], a double
   byte coding for characters.

   SDXF does not really deal with UTF-8 by itself, there are many
   possibilities to interprete an UTF-8 sequence:  The application may:

   -  reconstruct the UCS-2 sequence,
   -  accepts only the pure ASCII character and maps non-ASCII to a
      special 'non-printable' character.
   -  target is pure ASCII, non-ASCII is replaced in a senseful manner
      (French accented vowels replaced by vowels without accents, etc.).
   -  target is a specific ANSI character set, the non-ASCII chars are
      mapped as possible, other replaced to a 'non-printable'.
   -  etc.

   But SDXF offers an interface for the 'extract' and 'create'
   functions:

   A function pointer may be specified in the options table to maintain
   this possibility (see 8.5).  Default for this pointer is NULL: No
   further conversions are done by SDXF, the data are copied 'as is', it
   is treated as a bit string as for data type 'binary'.

   If this function is specified, it is used by the 'create' function
   with the 'toUTF8' mode, and by the 'extract' function with the '
   fromUTF8' mode.  The invoking of these functions is done by SDXF
   transparently.

   If the function returns zero (no conversion) SDXF copies the data
   without conversion.

10. Security Considerations

   Any corruption of data in the chunk headers denounce the complete
   SDXF structure.

   Any corruption of data in a encrypted or compressed SDXF structure
   makes this chunk unusable.  An integrity check after decryption or
   decompression should be done by the "enter" function.

   While using TCP/IP (more precisely: IP) as a transmission medium we
   can trust on his CRC check on the transport layer.




Wildgrube                    Informational                     [Page 19]


RFC 3072            Structured Data Exchange Format           March 2001


11. Some general hints

   1. A consistent construction of a SDXF structure is done if every
      "create" to a structured chunk is closed by a paired "leave".
      While a structured chunk is under construction, his data type is
      set to zero - that means: this chunk is inconsistent.  The
      SDX_leave function sets the datatype to "structured".

   2. While creating an elementary chunk a platform dependent
      transformation to a platform independent format of the data is
      performed - at the end of construction the content of the buffer
      is ready to transport to another site, without any further
      translation.

   3. As you see no data definition in your programming language is
      needed for to construct a specific SDXF structure.  The data is
      created dynamically by function calls.

   4. With SDXF as a base you can define protocols for client / server
      applications.  These protocols may be extended in downward
      compatibility manner by following two rules:

      Rule 1: Ignore unknown chunkIDs.

      Rule 2: The sequence of chunks should not be significant.

12. IANA Considerations

   The compression and encryption algorithms for SDXF is not fixed, SDXF
   is open for various algorithms.  Therefore an agreement is necessary
   to interprete the compression and encryption algorithm method
   numbers.  (Encryption methods are not a semantic part of SDXF, but
   may be used for a connection protocol to negotiate the encryption
   method to use.)

   Following two items are registered by IANA:

12.1 COMPRESSION METHODS FOR SDXF

   The compressed SDXF chunk starts with a "compression header".  This
   header contains the compression method as an unsigned 1-Byte integer
   (1-255).  These numbers are assigned by IANA and listed here:









Wildgrube                    Informational                     [Page 20]


RFC 3072            Structured Data Exchange Format           March 2001


   compression
    method     Description                     Hints
   ---------   ------------------------------- -------------
         01    RUN-LENGTH algorithm            see chap. 5
         02    DEFLATE (ZIP)                   see [DEFLATE]
     03-239    IANA to assign
    240-255    private or application specific

12.2 ENCRYPTION METHODS FOR SDXF

   An unique encryption method is fixed or negotiated by handshaking.
   For the latter one a number for each encryption method is necessary.
   These numbers are unsigned 1-Byte integers (1-255).  These numbers
   are assigned by IANA and listed here:

   encryption
     method    Description
    ---------  ------------------------------
     01-239    IANA to assign
    240-255    private or application specific

12.3 Hints for assigning a number:

   Developers which want to register a compression or encrypt method for
   SDXF should contact IANA for a method number.  The ASSIGNED NUMBERS
   document should be referred to for a current list of METHOD numbers
   and their corresponding protocols, see [IANA].  The new method SHOULD
   be a standard published as a RFC or by a established standardization
   organization (as OSI).

13. Discussion

   There are already some standards for Internet data exchanging, IETF
   prefers ASN.1 and XML therefore.  So the reasons for establish a new
   data format should be discussed.

13.1 SDXF vs. ASN.1

   The demand of ASN.1 (see [ASN.1]) is to serve program language
   independent means to define data structures.  The real data format
   which is used to send the data is not defined by ASN.1 but usually
   BER or PER (or some derivates of them like CER and DER) are used in
   this context, see [BER] and [PER].








Wildgrube                    Informational                     [Page 21]


RFC 3072            Structured Data Exchange Format           March 2001


   The idea behind ASN.1 is: On every platform on which a given
   application is to develop descriptions of the used data structures
   are available in ASN.1 notation.  Out off these notations the real
   language dependent definitions are generated with the help of an
   ASN.1-compiler.

   This compiler generates also transform functions for these data
   structures for to pack and unpack to and from the BER (or other)
   format.

   A direct comparison between ASN.1 and SDXF is somehow inappropriate:
   The data format of SDXF is related rather to BER (and relatives).
   The use of ASN.1 to define data structures is no contradiction to
   SDXF, but: SDXF does not require a complete data structure to build
   the message to send, nor a complete data structure will be generated
   out off the received message.

   The main difference lies in the concept of building and
   interpretation of the message, I want to name it the "static" and
   "dynamic" concept:

   o  ASN.1 uses a "static" approach: The whole data structure must
      exists before the message can be created.

   o  SDXF constructs and interpretes the message in a "dynamic" way,
      the message will be packed and unpacked step by step by SDXF
      functions.

   The use of static structures may be appropriate for a series of
   applications, but for complex tasks it is often impossible to define
   the message as a whole.  As an example try to define an ASN.1
   description for a complex structured text document which is presented
   in XML:  There are sections and paragraphs and text elements which
   may recursively consist of sections with specific text attributes.

13.2 SDXF vs. XML

   On the one hand SDXF and XML are similar as they can handle any
   recursive complex data stream.  The main difference is the kind of
   data which are to be maintained:

   o  XML works with pure text data (though it should be noted that the
      character representation is not standardized by XML).  And: a XML
      document with all his tags is readable by human.  Binary data as
      graphic is not included directly but may be referenced by an
      external link as in HTML.





Wildgrube                    Informational                     [Page 22]


RFC 3072            Structured Data Exchange Format           March 2001


      In XML there is no strong separation between informational and
      control data, escape characters (like "<" and "&") and the
      <![CDATA[...]]> construction are used to distinguish between these
      two types of data.

   o  SDXF maintains machine-readable data, it is not designed to be
      readable by human nor to edit SDXF data with a text editor (even
      more if compression and encryption is used).  With the help of the
      SDXF functions you have a quick and easy access to every data
      element.  The standard parser for a SDXF data structure follows
      always a simple template, the "while - switch -case ID -
      enter/extract" pattern as outlined in chap. 3.4.2.

   Because of the complete different philosophy behind XML and SDXF (and
   even ASN.1) a direct comparison may not be very senseful, as XML has
   its own right to exist next to ASN.1 (and even SDXF).

   Nevertheless there is a chance to convert a XML data stream into a
   SDXF structure:  As a first strike, every XML tag becomes a SDXF
   chunk ID.  An elementary sequence <tag>pure text</tag> can be
   transformed into an elementary (non-structured) chunk with data type
   "character".  Tags with attributes and sequences with nested tags are
   transformed into structured chunks.  Because XML allows a tag
   sequence everywhere in a text stream, an artificially "elementary
   text" tag must be introduced:
   If <t> is the tag for text elements, the sequence:

   <t>this is a text <attr value='bold'>with</attr> attributes</t>

   is to be "in thought" replaced by:

   <t><et>this is a text </et><attr value='bold'><et>with</et></attr>
   <et> attributes</et></t>

   (With "et" as the "elementary text" tag)
















Wildgrube                    Informational                     [Page 23]


RFC 3072            Structured Data Exchange Format           March 2001


   This results in following SDXF structure:

   ID_t
   |
   +-- ID_et = " this is a text "
   |
   +-- ID_attr
   |   |
   |   +-- ID_value = "bold"
   |   |
   |   +-- ID_et = "with"
   |
   +-- ID_et = " attributes"

   ID_t and ID_et may be represented by the same chunk ID, only
   distinguished by the data type ("structured" for <t> and "character"
   for <et>)

   Binary data as pictures can be directly imbedded into a SDXF
   structure instead referencing them as an external link like in HTML.

14. Author's Address

   Max Wildgrube
   Schlossstrasse 120
   60486 Frankfurt
   Germany

   EMail: max@wildgrube.com

15. Acknowledgements

   I would like to thank Michael J. Slifcak (mslifcak@iss.net) for the
   supporting discussions.

16. References

   [ASN.1]   Information processing systems - Open Systems
             Interconnection, "Specification of Abstract Syntax Notation
             One (ASN.1)", International Organization for
             Standardization, International Standard 8824, December
             1987.

   [BER]     Information Processing Systems - Open Systems
             Interconnection - "Specification of Basic Encoding Rules
             for Abstract Notation One (ASN.1)", International
             Organization for Standardization, International Standard
             8825-1, December 1987.



Wildgrube                    Informational                     [Page 24]


RFC 3072            Structured Data Exchange Format           March 2001


   [DEFLATE] Deutsch, P., "DEFLATE Compressed Data Format Specification
             version 1.3", RFC 1951, May 1996.

   [IANA]    Internet Assigned Numbers Authority,
             http://www.iana.org/numbers.htm

   [PER]     Information Processing Systems  - Open Systems
             Interconnection -"Specification of Packed Encoding Rules
             for Abstract Syntax Notation One (ASN.1)", International
             Organization for Standardization, International Standard
             8825-2.

   [UCS]     ISO/IEC 10646-1:1993. International Standard -- Information
             technology -- Universal Multiple-Octet Coded Character Set
             (UCS)

   [UTF8]    Yergeau, F., "UTF-8, a transformation format of ISO 10646",
             RFC 2279, January 1998.

































Wildgrube                    Informational                     [Page 25]


RFC 3072            Structured Data Exchange Format           March 2001


17.  Full Copyright Statement

   Copyright (C) The Internet Society (2001).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.



















Wildgrube                    Informational                     [Page 26]